Community Forum: Kaki Model MalaysiaWant to meet up with modelers in your country or region? This is the place.
Hosted by Jim Starkweather
Status Update!
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 09:13 PM UTC
I m blurred but I think your compressor can be saved. Probably just replace all those plastic with something metallic like brass, e.g.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 09:21 PM UTC
Quoted Text
I m blurred but I think your compressor can be saved. Probably just replace all those plastic with something metallic like brass, e.g.
yeah..i think that could be done if we have the right material and equipment..
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 09:26 PM UTC
Sil, wanna bring over during our next SnT session? We will have a good look and see what we can do.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 09:34 PM UTC
Quoted Text
Sil, wanna bring over during our next SnT session? We will have a good look and see what we can do.
sure if the timing is good!
anyway when was our next meeting...??
i'm kinda lost..sorry
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 09:37 PM UTC
We are calling for the SnT session on this SAT 3 SEP 2005. Session starts with lunch 1200 hr at Centre Point Food Court then follwed-by info changing and HHQ visit up to 1500 hr.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 09:45 PM UTC
Quoted Text
We are calling for the SnT session on this SAT 3 SEP 2005. Session starts with lunch 1200 hr at Centre Point Food Court then follwed-by info changing and HHQ visit up to 1500 hr.
haiya...realy realy sorry la guys........
this weekend ade kenduri kawin lorrrr...so many wedding invitation laaaa...haiya....feel depressed la cannot join u all... it's thw wife cousin who get married...u know la if we man dont go what will the wife say..hahaha....i have another friend weeding in the morning... wish i could cut my self into 3 pieces
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 09:53 PM UTC
Some use knives but I use syringe. Let us clone you Sil!
Sorry to hear that but please show me the pics of the damage so that I figure out what I can do to your compressor.
Sorry to hear that but please show me the pics of the damage so that I figure out what I can do to your compressor.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Thursday, September 01, 2005 - 02:24 PM UTC
Status for today
the damaged compressor part was being repaired. I seal the crack with superglue... but that wont cured it 100% but at least i can still spraying... the hissing sound is there but slower than before.... so i think i have to get the replacement jugak laaa
my Flak 43 is almost ready..actually it's finished last week but the oil washes ruined some of the base color..damn!
so now working on the figurines for the flak dio.. they were 1 legend production figures relax, 2 CMK soldiers also relax and a bunch of DML infantries doing whatever they like..haha
the flak bunker is 98%(??) complete!
beside that on the shelf i have 1/48 F-15J...still at 20% construction phase...
and i think mojimbo like this, the work on my Flak 18/36 was already commenced last night...took me 3 hours to assemble to gun and its subassemblies..sakit mata woooo..so many part... the main gun itself have over 30 parts....
that's update for today..
what about you??
the damaged compressor part was being repaired. I seal the crack with superglue... but that wont cured it 100% but at least i can still spraying... the hissing sound is there but slower than before.... so i think i have to get the replacement jugak laaa
my Flak 43 is almost ready..actually it's finished last week but the oil washes ruined some of the base color..damn!
so now working on the figurines for the flak dio.. they were 1 legend production figures relax, 2 CMK soldiers also relax and a bunch of DML infantries doing whatever they like..haha
the flak bunker is 98%(??) complete!
beside that on the shelf i have 1/48 F-15J...still at 20% construction phase...
and i think mojimbo like this, the work on my Flak 18/36 was already commenced last night...took me 3 hours to assemble to gun and its subassemblies..sakit mata woooo..so many part... the main gun itself have over 30 parts....
that's update for today..
what about you??
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Thursday, September 01, 2005 - 03:16 PM UTC
right now, my work in-progress is dml's pz.3 befehlswagen -assembly 60% done.... and still need to finish my M20 for spahwagen abteilung campaign...
seems i developed a habit that i'll finish assembling a few kits, put them aside, assemble more kits.... and finally painting all of them in one go at weekends... (i hope that's a valid excuse :-) !)
stuff to be painted next: panther G & PZ.IV ausf G
... can't wait to see the 88 and that flak bunker dio.. looked very promising the last time i saw it!
that 88 kit sure looks nice... but no budget now la. maybe someday dragon will release a sdkfz 7 to go with it!
seems i developed a habit that i'll finish assembling a few kits, put them aside, assemble more kits.... and finally painting all of them in one go at weekends... (i hope that's a valid excuse :-) !)
stuff to be painted next: panther G & PZ.IV ausf G
Quoted Text
my Flak 43 is almost ready....
....the flak bunker is 98%(??) complete!
....the work on my Flak 18/36 was already commenced last night...took me 3 hours to assemble to gun and its subassemblies..sakit mata woooo..so many part... the main gun itself have over 30 parts....
... can't wait to see the 88 and that flak bunker dio.. looked very promising the last time i saw it!
that 88 kit sure looks nice... but no budget now la. maybe someday dragon will release a sdkfz 7 to go with it!
beachbum
Member Since: March 05, 2004
entire network: 1,735 Posts
KitMaker Network: 0 Posts
Posted: Thursday, September 01, 2005 - 08:23 PM UTC
Sorry to hear about your compressor Boss. As for me I've finally finished my first resin figure on vikings and took some pics with my early birthday gift from the Home Ministry, a digital camera (Ricoh) with a macro capability of 1 cm. Too bad my camera skills are about as good as my airbrushing skills both of which are non-existent.
Going to work on (fingers crossed) a little Monte Cassino vignette with German paras. Vietnam era currently on hold and hopefully I'll stay a while in WW II.
Going to work on (fingers crossed) a little Monte Cassino vignette with German paras. Vietnam era currently on hold and hopefully I'll stay a while in WW II.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Thursday, September 01, 2005 - 08:37 PM UTC
Quoted Text
Sorry to hear about your compressor Boss. As for me I've finally finished my first resin figure on vikings and took some pics with my early birthday gift from the Home Ministry, a digital camera (Ricoh) with a macro capability of 1 cm. Too bad my camera skills are about as good as my airbrushing skills both of which are non-existent.
Going to work on (fingers crossed) a little Monte Cassino vignette with German paras. Vietnam era currently on hold and hopefully I'll stay a while in WW II.
wow CK..a camera for a present...lucky you.
there's lots of article on macro shooting....
pls get them and get as many photos ... and then present them to us here
good luck old man!!
beachbum
Member Since: March 05, 2004
entire network: 1,735 Posts
KitMaker Network: 0 Posts
Posted: Thursday, September 01, 2005 - 08:49 PM UTC
Thanks Mojimbo. My work still has a long way to go to reach the level of the 2 Alans and Haunted Tank's work in our M'sian forum.
I have posted it in Figures forum under the titile of "Varangoi". Many thanks again for the encouragement Mojimbo.
I have posted it in Figures forum under the titile of "Varangoi". Many thanks again for the encouragement Mojimbo.
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Thursday, September 01, 2005 - 10:25 PM UTC
Just finished the Leopard A6 and now moving on to something smaller - Ford TC Armoured Vehicle. Hope this would be a quick build.
beachbum
Member Since: March 05, 2004
entire network: 1,735 Posts
KitMaker Network: 0 Posts
Posted: Friday, September 02, 2005 - 12:38 PM UTC
Not my current cup of tea but I have to say the camo is very well done with a nice delicate wash to bring out the details, Argrillion.
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 04, 2005 - 12:44 PM UTC
Instead of getting the Ford done last weekend, started on something else. 
! Will make an update once I get a pic.
! Will make an update once I get a pic. moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 04, 2005 - 12:54 PM UTC
Quoted Text
your leopard, and target_j's LVT are a masterpiece of work! i wonder why you guys didn't post the pics in the armor forum, i'm sure everyone will like it...
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, September 04, 2005 - 01:11 PM UTC
Quoted Text
Just finished the Leopard A6 and now moving on to something smaller - Ford TC Armoured Vehicle. Hope this would be a quick build.
Argrillion, that's was magnificent Leopard... i have this kit also about 6 years ago...but i didnt have an airbrush that time so just paint it with one tone scheme....
i love this cammo job of yours... i agree with moJimbo..why didnt u putyour work in AFv forum or Rivet Review Board...
will love to see other member comments on your work... dont be shy la..
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 04, 2005 - 02:52 PM UTC
Missing a few good photos, boss. But soon I will post.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, September 11, 2005 - 02:13 PM UTC
just upload my flak enbankment in RR board..here is the link
flak enbankment
my compressor is still bocor la...but i tampal with epoxy filler..will see it this evening when the filler is cured...
the thing is, according to the machine spareparts tauke, my pressure switch is not mean for air compressor..it's for water pump....and the part is a lot more expensive than that of air compressor...
arghhhhh...all of them pening to learn about my compressor setup...
flak enbankment
my compressor is still bocor la...but i tampal with epoxy filler..will see it this evening when the filler is cured...
the thing is, according to the machine spareparts tauke, my pressure switch is not mean for air compressor..it's for water pump....and the part is a lot more expensive than that of air compressor...
arghhhhh...all of them pening to learn about my compressor setup...
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 11, 2005 - 04:18 PM UTC
Quoted Text
my compressor is still bocor la...but i tampal with epoxy filler..will see it this evening when the filler is cured...
the thing is, according to the machine spareparts tauke, my pressure switch is not mean for air compressor..it's for water pump....and the part is a lot more expensive than that of air compressor...
Boss Sil, looks like you got con (for buying the compressor) or you are about to be con (for replacing the pressure switch).
I share your confusion as recently I had my compressor bearing replaced and then the motor fused! It took a couple of gruelling weeks to get my compressor repaired. Sorry to hear your compressor is still having problem.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, September 11, 2005 - 04:35 PM UTC
Quoted Text
Quoted Text
my compressor is still bocor la...but i tampal with epoxy filler..will see it this evening when the filler is cured...
the thing is, according to the machine spareparts tauke, my pressure switch is not mean for air compressor..it's for water pump....and the part is a lot more expensive than that of air compressor...
Boss Sil, looks like you got con (for buying the compressor) or you are about to be con (for replacing the pressure switch).
I share your confusion as recently I had my compressor bearing replaced and then the motor fused! It took a couple of gruelling weeks to get my compressor repaired. Sorry to hear your compressor is still having problem.
Argrillion,
itu la pasal...
so many con man la..the thing is the compressor is kinda funny
and more funny than any these,, i'm inspector of factory and machinery ...been working a while in compressor design.,.,.gave approval to pressure vessel...
but they were all industrial grade compressor / vessel...when come to this small compressor, i'm lost..
i bought it without any technical sheet/specs..that's bothering me ..even the company that fabricate those industrial compressor also pening la when i told them about my tiny compressor
and they also dont have the tiny spare parts
so know, i hope the cracked filler will do its job!! Otherwise i may need a new compressor la ...but that mean i have to sell my car then..haha
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 11, 2005 - 05:14 PM UTC
Sil, there is a compressor spare part shop along Jalan Pudu somewhere near the Waterman shop. You can see the shop on the right if you are travelling from Puduraya to Jalan Pasar (after Pudu Jail). The shop is on the same row with quite a bit of spare parts shops. Hope this info helps - found it on Saturday 10 Sep 2005.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, September 11, 2005 - 05:51 PM UTC
Quoted Text
Sil, there is a compressor spare part shop along Jalan Pudu somewhere near the Waterman shop. You can see the shop on the right if you are travelling from Puduraya to Jalan Pasar (after Pudu Jail). The shop is on the same row with quite a bit of spare parts shops. Hope this info helps - found it on Saturday 10 Sep 2005.
where is this place?? somewhere near LRT station ?? waterman shop?? tak pernah dengar la bro?
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, September 11, 2005 - 07:37 PM UTC
There is no LRT over there. You will need to drive there along Jalan Pudu heading towards the intersection of Jalan Pasar after Pudu Jail (or Jalan Bukit Bintang)). According to the advertisement board, they repair compressors from Iwata also.
I will sketch a map if required, Sil.
I will sketch a map if required, Sil.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Monday, September 12, 2005 - 12:44 PM UTC
Quoted Text
There is no LRT over there. You will need to drive there along Jalan Pudu heading towards the intersection of Jalan Pasar after Pudu Jail (or Jalan Bukit Bintang)). According to the advertisement board, they repair compressors from Iwata also.
I will sketch a map if required, Sil.
wa..u read from the advertisement board??
the pressure switch still bocor last night...but i still continuing spraying..after that i filled the bocor part (after locating with air sabun)...i filled with miluput and then a steel epoxy sealer...
will see if it's still bocor this evening
 |
WEB HOSTING BY
Copyright ©2021 KitMaker Network and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.