today is sunday...and i have to work (again)..this is the third sunday in a row that aku kena kerja...
this is because our emergency control center has been activated since last friday...so everyone of us 'have' to work on 5 hours shift basis...........
now the API is OK in Klang Valley..however the API in northen states still at Unhealthy level
here is the 5 worst area and their API , at 9.00 am 14th August
USM PEnang 144
Kangar 139
ILP, Perai 180
Seri Manjung Perak 195
Sebarang Jaya, 149
the rest of the country were between 28-100
be carefull out there u guys...the particulate is categorised as PM10 which means it's smaller then 10 microns..it will pass our body defence and filter system... so be sure what type of mask u wear! ok...........
30 minutes more to go back
Community Forum: Kaki Model MalaysiaWant to meet up with modelers in your country or region? This is the place.
Hosted by Jim Starkweather
Status Update!
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Saturday, August 13, 2005 - 03:31 PM UTC
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 02:32 PM UTC
hello again kawan2
where have u all been...senyap saja sejak kebelakangan ni..
well i just siapkan my Air over the sea campaign..
here is the link and photos...
https://armorama.kitmaker.net/forums/54709&page=1
where have u all been...senyap saja sejak kebelakangan ni..
well i just siapkan my Air over the sea campaign..
here is the link and photos...
https://armorama.kitmaker.net/forums/54709&page=1
seelianglim
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 03:06 PM UTC
Hello,
I ada satu F-14 Tomcat by Tamiya (1/32) tetapi tak buat sebab kalau habis buat tak tahu nak letak kat mana.. :-)
sllim
I ada satu F-14 Tomcat by Tamiya (1/32) tetapi tak buat sebab kalau habis buat tak tahu nak letak kat mana.. :-)
sllim
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 03:11 PM UTC
Quoted Text
I ada satu F-14 Tomcat by Tamiya (1/32) tetapi tak buat sebab kalau habis buat tak tahu nak letak kat mana.. :-)
sllim
ha... that's why i don't buy humungous kits! no space to put them... have to buy a large cabinet/display case etc..etc... plus the wife sure complain one
anyway.. soo what are u working on now seelianglim?
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 03:24 PM UTC
Quoted Text
well i just siapkan my Air over the sea campaign..here is the link and photos...
https://armorama.kitmaker.net/forums/54709&page=1
nice one boss.. eh, said you want to build the f14 dio with ground crew..? KIV dulu aaa?
what's the next project?
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 03:51 PM UTC
Quoted Text
Quoted Textwell i just siapkan my Air over the sea campaign..here is the link and photos...
https://armorama.kitmaker.net/forums/54709&page=1
nice one boss.. eh, said you want to build the f14 dio with ground crew..? KIV dulu aaa?
what's the next project?
yup..KIV dulu tapi tengah assembled la ground crew tuh..
cuma tengah siapkan carrier deck..siap dengan jet blast deflector... yg nih leceh sikit....got no time meh...
current project, still the flak 43 bunker the dio...
right now the flak 43 baru je lepas painting.... need a few weathering process.... 3 figures are almost done...
well jimbo, i have to shift my hobby room to the room upstairs..the room as u see, too kecik la..sesak nafas beb...
so this weekend is a moving weekend...hehe
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 03:57 PM UTC
Quoted Text
Hello,
I ada satu F-14 Tomcat by Tamiya (1/32) tetapi tak buat sebab kalau habis buat tak tahu nak letak kat mana.. :-)
sllim
Lim,
that is a BIG kit.... yes memang x cukup space nak letak..
take a look at this
that's also big kit (almost the same size with your tomcat..but 2 inches shorter)...
i make my own display case and the phantom have it's own display case...it's big...i think the display case is about 90cm x 50 cm and 60 cm H..
the problem is i dont know where to put my display case...haha
so the display case (and the phantom) will be put to anywhere that sesuai from time to time....
susah oo..unless u put it at your office.... but aku dah serik letak kat opis...so many idiots will try to touch them..
i broke 2 of my models....
seelianglim
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 05:41 PM UTC
Hello MoJimbo and Silantra,
Currently i am not building anything as i had just completed my Tamiya's T-34 (winter guise , using dab_newton&winsor_liquid_mask_with_sponge method ) last month. I need 'mood' to build things. So right now i am back to my radio control cars and helicopters.
Actually i do have a few big kits , eg, Hasegawa's 1/32 Zero, A-4 Skyhawk n F-16 (all old kits), and Trumpeter's 1/24 Spitfire. Hoho..i will take pictures of my collection. For some reason i like to keep all the boxes as well. Really cram up the whole place. I am lucky as i have a whole store room to put all my stuffs. Dunno what's gonna happen when i move to my new place at the end of the year. I wonder if my soon_to_be_my wife wants a say during the renovation of the place or not?
Maybe i'll paint the resin pilots that come in the Trumpeter's Spitfire as my next 'project'.
sllim
Currently i am not building anything as i had just completed my Tamiya's T-34 (winter guise , using dab_newton&winsor_liquid_mask_with_sponge method ) last month. I need 'mood' to build things. So right now i am back to my radio control cars and helicopters.
Actually i do have a few big kits , eg, Hasegawa's 1/32 Zero, A-4 Skyhawk n F-16 (all old kits), and Trumpeter's 1/24 Spitfire. Hoho..i will take pictures of my collection. For some reason i like to keep all the boxes as well. Really cram up the whole place. I am lucky as i have a whole store room to put all my stuffs. Dunno what's gonna happen when i move to my new place at the end of the year. I wonder if my soon_to_be_my wife wants a say during the renovation of the place or not?
Maybe i'll paint the resin pilots that come in the Trumpeter's Spitfire as my next 'project'.
sllim
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 05:53 PM UTC
Quoted Text
..... Actually i do have a few big kits , eg, Hasegawa's 1/32 Zero, A-4 Skyhawk n F-16 (all old kits), and Trumpeter's 1/24 Spitfire...
are those finished models with you in UK? shipping them back to malaysia will be quite a problem...
:-)
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 06:00 PM UTC
Quoted Text
... have to shift my hobby room to the room upstairs..the room as u see, too kecik la..sesak nafas beb... so this weekend is a moving weekend...hehe
..your'e moving to a bigger room upstairs aaaa...
maybe the current room can be used as a model gallery....... can be ready in time for this raya open house ka? kih kih kih....
seelianglim
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 06:34 PM UTC
Hello moJimbo,
:-) You had confused me with Ikoky liao ler. Ikoky is from UK ,Cambridge. Me now in Malaysia, specifically in Subang Jaya, tetapi bekerja di PutraJaya (kat bangunan KSM) . My hometown is in PD (thats where my models are). But i had studied in Ottawa,Canada. I had built models while i studied there but didnt bring a single model back. All bagi kawan serta my brother kat sana. Dont want to think about their fate oso..
sllim
:-) You had confused me with Ikoky liao ler. Ikoky is from UK ,Cambridge. Me now in Malaysia, specifically in Subang Jaya, tetapi bekerja di PutraJaya (kat bangunan KSM) . My hometown is in PD (thats where my models are). But i had studied in Ottawa,Canada. I had built models while i studied there but didnt bring a single model back. All bagi kawan serta my brother kat sana. Dont want to think about their fate oso..
sllim
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 06:37 PM UTC
Quoted Text
Quoted Text
... have to shift my hobby room to the room upstairs..the room as u see, too kecik la..sesak nafas beb... so this weekend is a moving weekend...hehe
..your'e moving to a bigger room upstairs aaaa...
maybe the current room can be used as a model gallery....... can be ready in time for this raya open house ka? kih kih kih....
yo jimbo..the answer is yes la.... but this raya donno if ada buat open house or not... but sure u can come anytime tak kire raya sahaja...so those everybody...hehe
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 06:40 PM UTC
Quoted Text
Hello moJimbo,
:-) You had confused me with Ikoky liao ler. Ikoky is from UK ,Cambridge. Me now in Malaysia, specifically in Subang Jaya, tetapi bekerja di PutraJaya (kat bangunan KSM) . My hometown is in PD (thats where my models are). But i had studied in Ottawa,Canada. I had built models while i studied there but didnt bring a single model back. All bagi kawan serta my brother kat sana. Dont want to think about their fate oso..
sllim
Yo Lim,
as mentioned in the other thread that we're working in the same building la...so which floor are u??
i'm in level 4, NCOSH
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 06:49 PM UTC
Quoted Text
:-) You had confused me with Ikoky liao ler. Ikoky is from UK ,Cambridge.
... sllim
..ayoo.. this is so embarassing laa.. ha ha..sorry.
this is what happen if you stare at the pc monitor for 4 straight hours..
...starting to see rainbows everywhere ... ha ha :-) man, wish i was at home, airbrushing the panther G..... :-)
seelianglim
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 07:26 PM UTC
Hello Silantra,
Hahha..i just went downstairs to look for u,but u just left ur cubicle..I am on 6th floor, BTM (bahagian Teknologi Maklumat)
sllim
Hahha..i just went downstairs to look for u,but u just left ur cubicle..I am on 6th floor, BTM (bahagian Teknologi Maklumat)
sllim
beachbum
Member Since: March 05, 2004
entire network: 1,735 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 07:47 PM UTC
Obviously from the "real time" posts there at least 2 people not at their desk and not doing their work, the Boss and Lim (hehheh). Of course you could include also me and Mojimbo too (who's seeing rainbows). :-)
At any rate I'm still working on my first resin figs from Verlinden on 2 vikings. Putting in the last touches and should be done this weekend except no camera. Can't use the camera at my previous job so I'll probably have to get one soon.
Somehow I've skipped WWII from Vietnam and gone back to ancient times.
At any rate I'm still working on my first resin figs from Verlinden on 2 vikings. Putting in the last touches and should be done this weekend except no camera. Can't use the camera at my previous job so I'll probably have to get one soon.
Somehow I've skipped WWII from Vietnam and gone back to ancient times.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Wednesday, August 24, 2005 - 08:31 PM UTC
Quoted Text
Obviously from the "real time" posts there at least 2 people not at their desk and not doing their work, the Boss and Lim (hehheh). Of course you could include also me and Mojimbo too (who's seeing rainbows). :-)
At any rate I'm still working on my first resin figs from Verlinden on 2 vikings. Putting in the last touches and should be done this weekend except no camera. Can't use the camera at my previous job so I'll probably have to get one soon.
Somehow I've skipped WWII from Vietnam and gone back to ancient times.
argh...u got me CK ...
yes indeed Lim did see me just now...
we're having fun talking about models...one of my kerani tanye ' sape org tadi tu?? apsal cerita pasal Tamiya??
wakakaka...i need some excuse the tell the kerani what tamiya is...and it's not just tamiya...
well nice talking to u Lim.... too bad we're at the office ..maybe someday we have a teh tarik downstairs hah...then boleh lepak lama2...
well have to run bawah./..got something to be done!!
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, August 24, 2005 - 08:34 PM UTC
Quoted Text
Obviously from the "real time" posts there at least 2 people not at their desk and not doing their work, the Boss and Lim (hehheh). Of course you could include also me and Mojimbo too (who's seeing rainbows). :-)
.... i spend almost half the office time doing 'historical and procurement/construction research' in the internet...
so, yeah, i guess that's work too... he he.
seelianglim
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Thursday, August 25, 2005 - 12:52 PM UTC
Hello all,
Yes, work was put away for about 30 mins. :-) . Spoke to Silantra on various subjects with regards to models. Hope to meet him again.
sllim
Yes, work was put away for about 30 mins. :-) . Spoke to Silantra on various subjects with regards to models. Hope to meet him again.
sllim
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 03:08 PM UTC
greeting fellas,
what's building??
yesterday i move the room upstairs....penat oo...still x habis kemas
while i was airbrushing, i heard a hissing sound from the compressor....but the pressure is still good
after carefully exermine my compressor, i found that the hissing sound came from the relief valve compartment...take a while to open and dismantle the relief valve... there is a plastic plate at the back of the valve...and there were 2 cracks (small) along the hexagonal shape plastic... this is the leak source...
so i guess i have to stop airbrushing while getting the spare parts and i dont know if there is a spare parts for this!!!
i hate this when u're in the middle of something it happen!!
now all of the part had been dismantled....
damn!!!
what's building??
yesterday i move the room upstairs....penat oo...still x habis kemas
while i was airbrushing, i heard a hissing sound from the compressor....but the pressure is still good
after carefully exermine my compressor, i found that the hissing sound came from the relief valve compartment...take a while to open and dismantle the relief valve... there is a plastic plate at the back of the valve...and there were 2 cracks (small) along the hexagonal shape plastic... this is the leak source...
so i guess i have to stop airbrushing while getting the spare parts and i dont know if there is a spare parts for this!!!
i hate this when u're in the middle of something it happen!!
now all of the part had been dismantled....
damn!!!
moJimbo
Member Since: October 06, 2004
entire network: 986 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 04:32 PM UTC
Quoted Text
....so i guess i have to stop airbrushing while getting the spare parts and i dont know if there is a spare parts for this!!! i hate this when u're in the middle of something it happen!!
hmmm.... hard to find parts, perhaps it's more worth it to buy a new one.....
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 04:39 PM UTC
Quoted Text
Quoted Text
....so i guess i have to stop airbrushing while getting the spare parts and i dont know if there is a spare parts for this!!! i hate this when u're in the middle of something it happen!!
hmmm.... hard to find parts, perhaps it's more worth it to buy a new one.....
dont say like that la...
kalau kena beli compressor baru, mana nak carik duit beb!!!
unless u all care to donate me a new compressor
i just saw a good one ..with a tag of RM1799..hahaha
ok, i'm off to kajang....carik spare parts
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 08:45 PM UTC
just get back from KL...what did i say KL??
yup..i went to kajang but there is no hope here..decide to take a turn and went to jln loke yew...lot's of machine store here
but all of them said i kena beli baru the whole things...i mean the pressure relief valve... man...but i decided not to buy it yet....try to reconfigure the part my self...
i knew it can last a few more hours
yup..i went to kajang but there is no hope here..decide to take a turn and went to jln loke yew...lot's of machine store here
but all of them said i kena beli baru the whole things...i mean the pressure relief valve... man...but i decided not to buy it yet....try to reconfigure the part my self...
i knew it can last a few more hours
Argrillion
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Sunday, August 28, 2005 - 08:51 PM UTC
Sil, do you have pics of the damage item of the compressor? Maybe I can help.
Silantra
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Sunday, August 28, 2005 - 08:58 PM UTC
Quoted Text
Sil, do you have pics of the damage item of the compressor? Maybe I can help.
haiya... i dont bring my camera today
anyway , the things is located at the back of the pressure switch...mine is in plastic...round shape with hexagonal male joint at the center of it...haha..sure pening
but the tauke kedai all said that this thing is rare..they allhave metal..but not plastic
later i will show u the photo
 |
WEB HOSTING BY
Copyright ©2021 KitMaker Network and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.