Hi all.
Earlier this evening I was at my desk working on the RMG build. That evil beast that lives in the carpet reached up and caused a piece I was sanding to go airborne. After spending the better part of half hour on my knees an idea came to me. I use masking tape to hold small parts when painting them, why not when sanding them? I took a piece of masking tape about 2inches long and wraped it around the trigger finger of my left hand. Then, holding the piece I had rescued from the carpet I returned to sanding. It worked great!! The tape held the piece in place even if I opened my hand,m plus the tape left no marks or scratches.
My first thought was that I got to pass this along. have fun and happy modelling
HarryD
Modeling in General
General discussions about modeling topics.
General discussions about modeling topics.
Hosted by Jim Starkweather
New use for masking tape.
wolfsix
Ohio, United States
Member Since: September 27, 2003
entire network: 754 Posts
KitMaker Network: 0 Posts
Member Since: September 27, 2003
entire network: 754 Posts
KitMaker Network: 0 Posts
Posted: Saturday, November 22, 2003 - 12:56 PM UTC
TreadHead
Colorado, United States
Member Since: January 12, 2002
entire network: 5,000 Posts
KitMaker Network: 1,210 Posts
Member Since: January 12, 2002
entire network: 5,000 Posts
KitMaker Network: 1,210 Posts
Posted: Saturday, November 22, 2003 - 01:03 PM UTC
...Thx Harry! Your name shouldn't be DiVencenzo, it should be DiVinci!!
Tread.
I'll be trying that reall soon.
kglack43
Alabama, United States
Member Since: September 18, 2003
entire network: 842 Posts
KitMaker Network: 0 Posts
Member Since: September 18, 2003
entire network: 842 Posts
KitMaker Network: 0 Posts
Posted: Saturday, November 22, 2003 - 01:32 PM UTC
So, that's why the called you "sticky fingers"
kglack
thanx 4 the tip
kglack
thanx 4 the tip
Posted: Saturday, November 22, 2003 - 09:07 PM UTC
Hi Harry
Thank you - that's a really neat idea! :-)
I thought you were going to describe using masking tape to pick parts off the carpet, but it's even better to stop them getting lost in the first place.
I'll try that next time.
All the best
Rowan
Thank you - that's a really neat idea! :-)
I thought you were going to describe using masking tape to pick parts off the carpet, but it's even better to stop them getting lost in the first place.
I'll try that next time.
All the best
Rowan
ModlrMike
Alberta, Canada
Member Since: January 03, 2003
entire network: 714 Posts
KitMaker Network: 0 Posts
Member Since: January 03, 2003
entire network: 714 Posts
KitMaker Network: 0 Posts
Posted: Sunday, November 23, 2003 - 03:49 AM UTC
Sign up another convert! I'll be using this tip in the future.
StukeSowle
Washington, United States
Member Since: November 08, 2002
entire network: 599 Posts
KitMaker Network: 0 Posts
Member Since: November 08, 2002
entire network: 599 Posts
KitMaker Network: 0 Posts
Posted: Sunday, November 23, 2003 - 08:11 AM UTC
Another tip I have heard for the same problem is strecthing nylon hose over the attachment on your vacuum and then going over the carpet with the vacuum on. The airflow will suck the bit up, but the hose won't allow it to enter the vacuum.
Never tried it myself, but sounds good in theory.
Never tried it myself, but sounds good in theory.
Graywolf
Senior Editor
Izmir, Turkey / Türkçe
Member Since: December 01, 2001
entire network: 6,405 Posts
KitMaker Network: 1,013 Posts
Member Since: December 01, 2001
entire network: 6,405 Posts
KitMaker Network: 1,013 Posts
Posted: Sunday, November 23, 2003 - 09:35 AM UTC
thanks for the tip Harry...useful one
TreadHead
Colorado, United States
Member Since: January 12, 2002
entire network: 5,000 Posts
KitMaker Network: 1,210 Posts
Member Since: January 12, 2002
entire network: 5,000 Posts
KitMaker Network: 1,210 Posts
Posted: Sunday, November 23, 2003 - 09:41 AM UTC
Quoted Text
I thought you were going to describe using masking tape to pick parts off the carpet, but it's even better to stop them getting lost in the first place.
That's funny, that's exactly what I thought he was going to say too!
Tread.
Major_Goose
Kikladhes, Greece / Ελλάδα
Member Since: September 30, 2003
entire network: 6,871 Posts
KitMaker Network: 0 Posts
Member Since: September 30, 2003
entire network: 6,871 Posts
KitMaker Network: 0 Posts
Posted: Sunday, November 23, 2003 - 07:56 PM UTC
For picking up small parts off the carpet beast i usually use this sticky tape roll with the handle that the cat and dog owners use to get all the animal hair off the house and theyre clothes. It sticks very easily leaves absolutely no marks and signs to the plastic and is ideal for that purpose. I ve also used in diorama ground construction to get off the excess of the groundwork material that was not sticked on the pva white glue you make 2-3 passes and its all there you cut the piece of tape and its ok ready to use. this roll costs about 2,5$ and has enough stickin tape to use for 2-3 years . try it on
bytepilot
Karnataka, India / भारत
Member Since: June 01, 2002
entire network: 381 Posts
KitMaker Network: 0 Posts
Member Since: June 01, 2002
entire network: 381 Posts
KitMaker Network: 0 Posts
Posted: Monday, November 24, 2003 - 09:29 PM UTC
That's the exact reason I don't work in carpeted areas !
I work on a good ol' wood or steel table, and in a room having black and dark yellow(sand) tiles. That way, I never have to go on my hands and knees with a magnifying glass too often.
Just a thought...LOL! Nice tip, BTW !! Thanks.
I also have anothr fav use for Scotch tape : I wrap it around my thumb, index and third fingers of the left hand while slicing and dicing sprue trees with a No 11 blade. That way, even if the blade slips, it won't dig a deep ditch in my fingernail roots (Ouch!!). It also provides good grip on the part being held for trimming...
Cheers.
BP.
I work on a good ol' wood or steel table, and in a room having black and dark yellow(sand) tiles. That way, I never have to go on my hands and knees with a magnifying glass too often.
Just a thought...LOL! Nice tip, BTW !! Thanks.
I also have anothr fav use for Scotch tape : I wrap it around my thumb, index and third fingers of the left hand while slicing and dicing sprue trees with a No 11 blade. That way, even if the blade slips, it won't dig a deep ditch in my fingernail roots (Ouch!!). It also provides good grip on the part being held for trimming...
Cheers.
BP.
Jurgen
Limburg, Belgium
Member Since: October 29, 2003
entire network: 651 Posts
KitMaker Network: 0 Posts
Member Since: October 29, 2003
entire network: 651 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, November 25, 2003 - 08:19 AM UTC
Quoted Text
strecthing nylon hose over the attachment on your vacuum and then going over the carpet with the vacuum on. The airflow will suck the bit up, but the hose won't allow it to enter the vacuum.
Don't just take your wives good ones and DON'T forget to take 'm off when you put the vacumer back in the closet....
#:-) #:-) #:-)
Guarnere
Tel Aviv-Yafo, Israel
Member Since: August 07, 2002
entire network: 15 Posts
KitMaker Network: 0 Posts
Member Since: August 07, 2002
entire network: 15 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, November 25, 2003 - 10:20 AM UTC
Looks like a usefull idea... i'll give it a try next time....
10x (:-)
10x (:-)