Member Since: July 14, 2005
entire network: 14 Posts
KitMaker Network: 0 Posts
Posted: Monday, August 29, 2005 - 08:22 AM UTC
Hi,
So my english is not good, my presentation will be short :-)
I gizmo, and I be back in the figure, after a little 5 years break. I have trying in 3D, CG character, but it's too hard and complicated for me...
Before I have make a few model kit and figure in 1/15 scale, my favourite scale for figure.
So, now I prefer make only figure.
Grumpyoldman
ConsigliereFlorida, United States
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Posted: Monday, August 29, 2005 - 08:24 AM UTC
Welcome Aboard Gizmo.
My one cats named Gizmo.
Character is what you do when no one is looking.
Few things are harder to put up with than a good example.- Mark Twain
Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world.--Thomas Carlyle
Member Since: July 14, 2005
entire network: 14 Posts
KitMaker Network: 0 Posts
Posted: Monday, August 29, 2005 - 08:42 AM UTC
I hope that your cats do not eat after midnight :-)
Florida, United States
Member Since: December 27, 2001
entire network: 4,268 Posts
KitMaker Network: 1,174 Posts
Posted: Monday, August 29, 2005 - 08:51 AM UTC
Welcome aboard Gizmo!
Would love to see some of the figures that you've made.
I will not grease the monkey bars. I will not grease the monkey bars. ...
Bart's chalkboard amercement
Grumpyoldman
Consigliere Florida, United States
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Posted: Monday, August 29, 2005 - 09:00 AM UTC
LOL... Gizmo..... good answer.... LOL
Character is what you do when no one is looking.
Few things are harder to put up with than a good example.- Mark Twain
Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world.--Thomas Carlyle
Buskerud, Norway
Member Since: July 31, 2005
entire network: 1,871 Posts
KitMaker Network: 376 Posts
Posted: Monday, August 29, 2005 - 09:32 AM UTC
Welcome, Gizmo
Looking forward to see your figures
Cheers
Erik
Moselle, France
Member Since: May 15, 2005
entire network: 5,653 Posts
KitMaker Network: 760 Posts
Posted: Monday, August 29, 2005 - 10:39 AM UTC
Bienvenue Gizmo!
You'll have fun here at Armorama! In France the movie you refer to is called "Les Gremlins"...
Jean-Luc
Better think one hour and build five minutes...
Than think five minutes and build an hour!
Ontario, Canada
Member Since: January 11, 2003
entire network: 1,339 Posts
KitMaker Network: 624 Posts
Posted: Monday, August 29, 2005 - 10:56 AM UTC
Welcome aboard Gizmo.. Glad to see you have joined the finest scale model site on the world wide web...
Dave
Putrajaya, Malaysia
Member Since: March 04, 2004
entire network: 2,511 Posts
KitMaker Network: 1,296 Posts
Posted: Monday, August 29, 2005 - 01:06 PM UTC
welcome to the bigA gizmo...
glad that you join us all..
The more i know, the less I understand!!!!
Quebec, Canada
Member Since: March 23, 2004
entire network: 2,412 Posts
KitMaker Network: 1,030 Posts
Posted: Monday, August 29, 2005 - 03:22 PM UTC
Quoted Text
You'll have fun here at Armorama! In France the movie you refer to is called "Les Gremlins
Sounds like its called les gremlins in quebec also francois!, i was wondering what gizmo ment in english... that was a good movie if i remember corectly, those little fur balls turning into monsters were quite intimidating for me
Frank
"The problem with the french is that they don't have a word for entreupreuneur"
George W.Bush
Quebec, Canada
Member Since: March 23, 2004
entire network: 2,412 Posts
KitMaker Network: 1,030 Posts
Posted: Monday, August 29, 2005 - 03:22 PM UTC
Quoted Text
You'll have fun here at Armorama! In France the movie you refer to is called "Les Gremlins
Sounds like its called les gremlins in quebec also francois!, i was wondering what gizmo ment in english... that was a good movie if i remember corectly, those little fur balls turning into monsters were quite intimidating for me
Welcome aboard gizmo, enjoy the stay and show us your talents with figures
Frank
"The problem with the french is that they don't have a word for entreupreuneur"
George W.Bush
#037
California, United States
Member Since: December 19, 2004
entire network: 2,870 Posts
KitMaker Network: 1,044 Posts
Posted: Monday, August 29, 2005 - 03:56 PM UTC
Welcome Gizmo! Love to see your Fig's .I am not confident that much with them and could always use some tricks and tips!
Cheers!
"It's not where you start.It's where you finish"-Model On!!!!
"I just drank what?"-Socrates
If the enemy is in range, so are you.......
'Impossible' means you haven't thought of the solution yet........
Singapore / 新加坡
Member Since: April 27, 2005
entire network: 1,396 Posts
KitMaker Network: 940 Posts
Posted: Monday, August 29, 2005 - 06:20 PM UTC
Greetings Gizmo..
Welcome to Armorama..
Kobenhavn, Denmark
Member Since: June 29, 2004
entire network: 6,760 Posts
KitMaker Network: 1,139 Posts
Posted: Monday, August 29, 2005 - 07:17 PM UTC
Hi Gizmo
Welcome to Armorama
On the workbench:
MPC: 1972 Pontiac GTO
Revell: 1965 Mustang
Verlinden 120mm guard of the marine.
Revell: 2010 Camaro
Monogram: 1931 Rolls Royce
Italeri: LVT2 Amtrac
Tekirdag, Turkey / Türkçe
Member Since: August 21, 2002
entire network: 3,289 Posts
KitMaker Network: 389 Posts
Posted: Monday, August 29, 2005 - 08:24 PM UTC
Welcome to the family Gizmo, good to have you here
Victoria, Australia
Member Since: July 28, 2004
entire network: 10,889 Posts
KitMaker Network: 2,373 Posts
Posted: Monday, August 29, 2005 - 11:16 PM UTC
Hi Gizmo,
Greetz from Cape Town, South Africa
Can't wait to see some of your figures.
Where abouts are you from?
Chat again soon
Rudi
Beware the populist demagogues at the head of private armies
Queensland, Australia
Member Since: April 10, 2005
entire network: 2,654 Posts
KitMaker Network: 292 Posts
Posted: Tuesday, August 30, 2005 - 12:31 AM UTC
welcome from sunny queensland to a fellow figure painter
Ian
Modeling is the ability to challenge the fences of the world
#073
Pennsylvania, United States
Member Since: October 05, 2002
entire network: 2,659 Posts
KitMaker Network: 865 Posts
Posted: Tuesday, August 30, 2005 - 12:58 AM UTC
Welcome to the big A.... hope you find lots of info here..
Just Your Everyday Average Model Builder
Grumpyoldman
Consigliere Florida, United States
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Posted: Tuesday, August 30, 2005 - 01:00 AM UTC
Quoted Text
Sounds like its called les gremlins in quebec also francois!, i was wondering what gizmo ment in english...
OK Frank,
Y O U A S K E D F O R I T !!!!
(From a TV show way before your time......!!!)
From WEBWORD
GIZMO
1. Something whose name is either forgotten or not known.
2. A device useful for a particular job.
SYNONYMS:
Dohickey
Doodad
Thingamabob
Thinggummy
Thingumabob
Thingamajig
Widget
I'm sure there are French words for each..... I just don't know them...... :-) :-)
Character is what you do when no one is looking.
Few things are harder to put up with than a good example.- Mark Twain
Make yourself an honest man, and then you may be sure that there is one less scoundrel in the world.--Thomas Carlyle
Massachusetts, United States
Member Since: January 20, 2005
entire network: 926 Posts
KitMaker Network: 289 Posts
Posted: Tuesday, August 30, 2005 - 02:34 AM UTC
Welcome Gizmo! You're going to love Armorama, check the forums daily you will love what your going to see.
Member Since: July 14, 2005
entire network: 14 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, August 30, 2005 - 03:46 AM UTC
thanks for the welcoming...
for "gizmo" it's english slang expession,I think not meaning in french. But can be translate by:
truc,
machin,
bidule
