A couple of weeks ago I moved into a new house.
When I viewed it there were some shelves inbetween the chimney breast and the wall which looked great,put the previous owners took them with them leaving 2 lines of raw plugs in the wall.
Ok thinks I,,,I liked the shelves so I'll replace them.
Luckily I managed to find plenty of brackets with the holes the correct distance apart to match the raw plug holes in the wall.
I had measured the width and it was just over 1m. 101cm to be exact.
Great I thought,,metre wide shelves should be EASY to find!
Are they
897mm or 1197mm is the standard sizes I found.
897?,,,,,1197?,,,,who dreams those sizes up? eh? eh?
SO,,,,,,,,Whats wrong with a Metre? :-) :-)
Nige
Spare Parts
For non-modeling topics and those without a home elsewhere.
For non-modeling topics and those without a home elsewhere.
Hosted by Jim Starkweather
Whats wrong with a metre?
Posted: Tuesday, March 06, 2007 - 11:31 PM UTC
matt
Campaigns Administrator
New York, United States
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Posted: Tuesday, March 06, 2007 - 11:35 PM UTC
Maybe the Chimney was "off" when it was Built..............
Posted: Tuesday, March 06, 2007 - 11:42 PM UTC
Quoted Text
Maybe the Chimney was "off" when it was Built..............
Good answer and I can see where your coming from Matt.
However,,I have a sneaking suspicion that the chimney was there first.
My main point is who dreams up these wierd "standard sizes"?
Nige
MajorPest
Vatican City
Member Since: October 22, 2006
entire network: 44 Posts
KitMaker Network: 0 Posts
Member Since: October 22, 2006
entire network: 44 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, March 06, 2007 - 11:58 PM UTC
Quoted Text
My main point is who dreams up these wierd "standard sizes"?
Would you believe "Wierd Standard People" who will be refered to as "WSP" in all future references to them.
Posted: Wednesday, March 07, 2007 - 12:19 AM UTC
Quoted Text
897mm or 1197mm is the standard sizes I found.
Ah, ye Olde 3 & 4 feet at work.
Posted: Wednesday, March 07, 2007 - 12:41 AM UTC
whats wrong with a metre eh? thats easy-
*in the style of the pub landlord* - "ITS FROM BRUSSELS"
*in the style of the pub landlord* - "ITS FROM BRUSSELS"
Posted: Wednesday, March 07, 2007 - 04:35 AM UTC
You could always buy the 1198mm ones and partake in some diy to cut them down to 1010mm- nothing a workmate and a circular saw can't handle.
Phil
Enters pedantic mode
Sorry to split hairs but i think you'll find the metre is FRENCH - which is obviously worse than belgian
Funny french historical stuff
I'll get me coat
Andy
Phil
Enters pedantic mode
Sorry to split hairs but i think you'll find the metre is FRENCH - which is obviously worse than belgian
Funny french historical stuff
I'll get me coat
Andy
Posted: Wednesday, March 07, 2007 - 04:51 AM UTC
You used to be able to buy it in understandable measures... Then Pres. Blair and his pals demanded everything had to be in Foreign.
Ohoh... I'm in trouble now!
Ohoh... I'm in trouble now!
Drader
Wales, United Kingdom
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Posted: Wednesday, March 07, 2007 - 02:45 PM UTC
But but 897mm isn't 3' either- it's 35 and bit "
David
David
jlmurc
England - East Anglia, United Kingdom
Member Since: August 29, 2005
entire network: 1,267 Posts
KitMaker Network: 0 Posts
Member Since: August 29, 2005
entire network: 1,267 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, March 07, 2007 - 03:26 PM UTC
The EEC strikes again. Typical blame Ted Heath and the gang.
John
John
Lucky13
Scotland, United Kingdom
Member Since: June 01, 2006
entire network: 1,707 Posts
KitMaker Network: 530 Posts
Member Since: June 01, 2006
entire network: 1,707 Posts
KitMaker Network: 530 Posts
Posted: Wednesday, March 07, 2007 - 03:45 PM UTC
Simple fellow travellers.....THAT would make it too simple for us mere mortals. :-) :-)
Drader
Wales, United Kingdom
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Posted: Wednesday, March 07, 2007 - 03:50 PM UTC
897mm is not even three Roman feet
Perhaps you ought to demolish the house and rebuild it so the shelves fit.....
David
Perhaps you ought to demolish the house and rebuild it so the shelves fit.....
David
Posted: Wednesday, March 07, 2007 - 04:41 PM UTC
It's very simple chaps
897mm is three metric feet
Andy
897mm is three metric feet
Andy
HONEYCUT
Victoria, Australia
Member Since: May 07, 2003
entire network: 4,002 Posts
KitMaker Network: 648 Posts
Member Since: May 07, 2003
entire network: 4,002 Posts
KitMaker Network: 648 Posts
Posted: Wednesday, March 07, 2007 - 05:37 PM UTC
Quoted Text
It's very simple chaps
897mm is three metric feet
Problem solved :-)
Or is that 3 foots?
Drader
Wales, United Kingdom
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Member Since: July 20, 2004
entire network: 3,791 Posts
KitMaker Network: 765 Posts
Posted: Wednesday, March 07, 2007 - 05:48 PM UTC
Quoted Text
It's very simple chaps
897mm is three metric feet
Andy
Very nearly....
Metric foot
So the BBC built to the metric foot did they?
David
Posted: Wednesday, March 07, 2007 - 09:08 PM UTC
Talking of feet,,,(metric or otherwise),,did you know that................
the distance between your wrist and your elbow is the same as the length of your foot?
Oh yeah,,shelves are up,,homebase cut shelves to size while you wait
Nige
the distance between your wrist and your elbow is the same as the length of your foot?
Oh yeah,,shelves are up,,homebase cut shelves to size while you wait
Nige
Posted: Wednesday, March 07, 2007 - 09:23 PM UTC
Quoted Text
Talking of feet,,,(metric or otherwise),,did you know that................
the distance between your wrist and your elbow is the same as the length of your foot?
Picture readers trying to put their feet next to their arm...
Picture the waiting room at th chiropractitioners in the morning...
:-) :-)
Jurjen
Groningen, Netherlands
Member Since: September 21, 2003
entire network: 3,040 Posts
KitMaker Network: 251 Posts
Member Since: September 21, 2003
entire network: 3,040 Posts
KitMaker Network: 251 Posts
Posted: Wednesday, March 07, 2007 - 11:50 PM UTC
Quoted Text
Picture readers trying to put their feet next to their arm...
Hehe, oke, now I'm really curious how many people tried when they read this, at least I did,...... :-) :-) :-)
Snowhand
Zuid-Holland, Netherlands
Member Since: January 08, 2005
entire network: 1,066 Posts
KitMaker Network: 324 Posts
Member Since: January 08, 2005
entire network: 1,066 Posts
KitMaker Network: 324 Posts
Posted: Thursday, March 08, 2007 - 02:43 AM UTC
So, can anyone explain why a foot is deemed 12 inch when at the time it was deemed, no one would have had 12 inch feet ????
Posted: Thursday, March 08, 2007 - 02:55 AM UTC
I heard once that the origin of the inch comes from the distance between the knuckle and the end of the thumb.
Dont know where a "foot" comes from though.
Heres another one to ponder.
Apparently,,your heart is the same size as your fist
Dont try this one at home,,especially in the State of California
Nige
Dont know where a "foot" comes from though.
Heres another one to ponder.
Apparently,,your heart is the same size as your fist
Dont try this one at home,,especially in the State of California
Nige
Snowhand
Zuid-Holland, Netherlands
Member Since: January 08, 2005
entire network: 1,066 Posts
KitMaker Network: 324 Posts
Member Since: January 08, 2005
entire network: 1,066 Posts
KitMaker Network: 324 Posts
Posted: Thursday, March 08, 2007 - 03:00 AM UTC
Quoted Text
I heard once that the origin of the inch comes from the distance between the knuckle and the end of the thumb.
Dont know where a "foot" comes from though.
Heres another one to ponder.
Apparently,,your heart is the same size as your fist
Dont try this one at home,,especially in the State of California
Nige
As I heard, the mainland equivalent of the inch, the duim (thumb) is the with of a thumb at it's widest point ( which mine pretty much is ).
Posted: Thursday, March 08, 2007 - 05:57 AM UTC
I think its only right and just that I post a photo of the shelves that started this great debate!
Nige
Nige
redneck
Pennsylvania, United States
Member Since: June 06, 2005
entire network: 1,602 Posts
KitMaker Network: 447 Posts
Member Since: June 06, 2005
entire network: 1,602 Posts
KitMaker Network: 447 Posts
Posted: Thursday, March 08, 2007 - 07:28 AM UTC
Quoted Text
Quoted TextPicture readers trying to put their feet next to their arm...
Hehe, oke, now I'm really curious how many people tried when they read this, at least I did,...... :-) :-) :-)
I did and oddly enough it worked.
Nice looking shelves.
Posted: Thursday, March 15, 2007 - 09:21 PM UTC
Quoted Text
I think its only right and just that I post a photo of the shelves that started this great debate!
Nige
ok they fit but they dont look level :-)
keith
Vic
England - South West, United Kingdom
Member Since: December 14, 2004
entire network: 1,697 Posts
KitMaker Network: 237 Posts
Member Since: December 14, 2004
entire network: 1,697 Posts
KitMaker Network: 237 Posts
Posted: Thursday, March 15, 2007 - 11:49 PM UTC
Quoted Text
I think its only right and just that I post a photo of the shelves that started this great debate!
Great work on the figure on the 3rd shelf up. Very realistic