Tools & Supplies
Discussions on the latest and greatest tools, glues, and gadgets.
Hosted by Matt Leese
Air Brush Air Supplies
Visit this Community
North Carolina, United States
Member Since: February 22, 2002
entire network: 11,718 Posts
KitMaker Network: 2,584 Posts
Posted: Tuesday, March 06, 2007 - 04:43 PM UTC
Here it is - finally.

Here is a nice review of a ton of airbrush air supplies. matt does a nice job explaining the pros and cons of each.

Thanks for your patience

Link to Item

If you have comments or questions please post them here.

Visit this Community
Pennsylvania, United States
Member Since: July 13, 2004
entire network: 6,705 Posts
KitMaker Network: 1,084 Posts
Posted: Tuesday, March 06, 2007 - 05:00 PM UTC
Nice feature, Gents!
Lotsa good info and photos...good job, Matt!
Visit this Community
Victoria, Australia
Member Since: July 28, 2004
entire network: 10,889 Posts
KitMaker Network: 2,373 Posts
Posted: Tuesday, March 06, 2007 - 05:53 PM UTC
Nice feature. Thanks Matt and Scott.

This is why I love KitMaker... I learn something new every day! I never knew about the compressed gas and tank options in so far as airbrush/spray gun propellant.

Thanks again guys
Staff MemberCampaigns Administrator
Visit this Community
New York, United States
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Posted: Tuesday, March 06, 2007 - 06:22 PM UTC
It was actually a Fun one to Write. I do need to take a updated pic of Grumpy's "Old Faithful" that A gave another life too!!!

Now, I know some might be asking.... Paintball tanks.......... I didn't cover them in the article as they're not Widely used. However I'd be weilling to say that they can be used as a Power source as well. it'd just be a matter of getting the Correct fittings and a Regulator for the CO2 or Nitrogen. I honestly don't have an Idea as to the "life" a 7,9 or 20 oz Paintball tank.

I tried to cover the Most commonly used "propellents"

Obviously I didn't cover any of the "industrial" type compressors like the Rotary Screw, Centrifugal & Axial varietys (they kind my employer builds on a very LARGE scale)

Any other Questions... feel free to ask.
Staff MemberConsigliere
Visit this Community
Florida, United States
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Posted: Tuesday, March 06, 2007 - 07:14 PM UTC
Nice article Matt.
Visit this Community
Colorado, United States
Member Since: February 01, 2003
entire network: 5,221 Posts
KitMaker Network: 1,983 Posts
Posted: Tuesday, March 06, 2007 - 10:05 PM UTC
Nice article, and very informative. Thanks Matt.