If anyone has built up their 3-in-1 Dragon Kit No. 6287 of the 8.8cm Flak 37, I'm looking for the following spares.

I'm looking for the upper Recuperator cylinder cover halves, the cover front cap and small upper center shield for the pressed shield version.

It would be the four items pictured at the bottom of this page, just above the "close window" button -- the ones that have the greater slant:

http://www.perthmilitarymodelling.com/reviews/vehicles/dragon/dr6287d01.htm

If you built (or are planning on building) your Flak 37 without the pressed shields I would DESPARATELY love to have these unused parts -- I'm about 80% complete building a Flak 36/43 and it's obvious from pictures that it had this type of shield set up. I really don't want to scratch this if possible.

Can anyone help????

I live in the USA and would be happy to reimburse postage charges.

[email protected]

hey Roy, Im pretty sure I have ya covered. I know for sure on the shield since I used the Lionroar set. The others I'll have to sift through my spares box, but I believe I have the ones you mentioned. If you could do me a favor and look at these photos of it to double check if I used them or not. http://panzercreations.fotopic.net/c903403_25.html
I'll get back to you this evening and let you know what Ive found.

alright...Ive gotem, just to be clear, there are 5 parts all together right? The five parts on the very bottom of that page. you never realize how many small spares you have until you try and find that "one"

Hi Roy,

I sent you an e-mail. Let me know if you still need the parts. I saw your post on HS.

Will be more than glad to help,

RobC