Scratchbuilders!: Armor/AFV
This is a group for armor scratchbuilding questions, topics and projects.
This is a group for armor scratchbuilding questions, topics and projects.
Hosted by Mike Kirchoff
Scratching Tyres. My method.
Removed by original poster on 11/08/06 - 18:50:50 (GMT).
RotorHead67
Virginia, United States
Member Since: May 07, 2003
entire network: 1,174 Posts
KitMaker Network: 161 Posts
Member Since: May 07, 2003
entire network: 1,174 Posts
KitMaker Network: 161 Posts
Posted: Tuesday, February 14, 2006 - 11:23 AM UTC
Roger,
Honest Indian!!! That has got too be the best old school way of doing it yourself. Lets give a nose up to $49 resin tire sets. I did basicly the exact, laminate and shape idea to build an AH-1S exhaust, that in the kit wasn't even close.
I just want you to know , you have now solved my own tire need problem to source tires for one of my projects. CHEERS
Honest Indian!!! That has got too be the best old school way of doing it yourself. Lets give a nose up to $49 resin tire sets. I did basicly the exact, laminate and shape idea to build an AH-1S exhaust, that in the kit wasn't even close.
I just want you to know , you have now solved my own tire need problem to source tires for one of my projects. CHEERS
matt
Campaigns Administrator
New York, United States
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Posted: Tuesday, February 14, 2006 - 03:41 PM UTC
I want to do something similar... only I'm going to start with a resin doughnut...................
drumthumper
Kansas, United States
Member Since: December 22, 2004
entire network: 392 Posts
KitMaker Network: 159 Posts
Member Since: December 22, 2004
entire network: 392 Posts
KitMaker Network: 159 Posts
Posted: Tuesday, February 14, 2006 - 03:48 PM UTC
Roger,
Bravo, dude! As someone who does a fair bit of scratchbuilding myself (with minimum of power tools, I might add) I can appreciate the methods you used in creating tires. A simple technique requiring only patience and thought. Thanks for enlightening us!
Mike Kirchoff
Bravo, dude! As someone who does a fair bit of scratchbuilding myself (with minimum of power tools, I might add) I can appreciate the methods you used in creating tires. A simple technique requiring only patience and thought. Thanks for enlightening us!
Mike Kirchoff
MrMox
Aarhus, Denmark
Member Since: July 18, 2003
entire network: 3,377 Posts
KitMaker Network: 925 Posts
Member Since: July 18, 2003
entire network: 3,377 Posts
KitMaker Network: 925 Posts
Posted: Tuesday, February 14, 2006 - 04:11 PM UTC
Weee, nice work - when you have done one, do you then cast the rest in resin ?
Grumpyoldman
Consigliere
Florida, United States
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Member Since: October 17, 2003
entire network: 15,338 Posts
KitMaker Network: 5,072 Posts
Posted: Tuesday, February 14, 2006 - 04:41 PM UTC
Rodger, that's an excellent SBS,
You should submit it as a feature How To article.
You should submit it as a feature How To article.
HONEYCUT
Victoria, Australia
Member Since: May 07, 2003
entire network: 4,002 Posts
KitMaker Network: 648 Posts
Member Since: May 07, 2003
entire network: 4,002 Posts
KitMaker Network: 648 Posts
Posted: Tuesday, February 14, 2006 - 04:50 PM UTC
Tremendous Rog!
Is this something you came up with on your lonesome, or is it an established idea that you have perfected?
Cheers
Brad
Is this something you came up with on your lonesome, or is it an established idea that you have perfected?
Cheers
Brad
Vadster
Tennessee, United States
Member Since: June 28, 2004
entire network: 987 Posts
KitMaker Network: 0 Posts
Member Since: June 28, 2004
entire network: 987 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, February 14, 2006 - 05:07 PM UTC
I have always wanted to see that process - that is awesome!
Posted: Tuesday, February 14, 2006 - 05:13 PM UTC
And here are some he did earlier---sounds like a Blue Peter sound bite :-) :-)
Excelent work ------thanks for sharing Roger
aye
BARV
(GOSMG)
slodder
North Carolina, United States
Member Since: February 22, 2002
entire network: 11,718 Posts
KitMaker Network: 2,584 Posts
Member Since: February 22, 2002
entire network: 11,718 Posts
KitMaker Network: 2,584 Posts
Posted: Tuesday, February 14, 2006 - 06:20 PM UTC
Wow - I think I need to go buy a case of liquid relaxer.
Don't worry about a written explanation - those photos are 100% great.
Give us an idea of how long it takes to make one wheel/tyre - 1 hour?
Don't worry about a written explanation - those photos are 100% great.
Give us an idea of how long it takes to make one wheel/tyre - 1 hour?
Removed by original poster on 11/08/06 - 18:51:34 (GMT).
Removed by original poster on 11/08/06 - 18:52:33 (GMT).
insolitus
Goteborgs och Bohus, Sweden
Member Since: July 28, 2005
entire network: 649 Posts
KitMaker Network: 113 Posts
Member Since: July 28, 2005
entire network: 649 Posts
KitMaker Network: 113 Posts
Posted: Tuesday, February 14, 2006 - 06:44 PM UTC
Wow...I want that patience too... I need my liquid nerve relaxer!
Cheers Andreas
Cheers Andreas
animal
Member Since: December 15, 2002
entire network: 4,503 Posts
KitMaker Network: 1,163 Posts
entire network: 4,503 Posts
KitMaker Network: 1,163 Posts
Posted: Tuesday, February 14, 2006 - 07:22 PM UTC
Thank you for the photos and tips. Please submit this for an article. My hats off to you. These are fantastic. I am going to have to try this.
Posted: Tuesday, February 14, 2006 - 10:16 PM UTC
I can only add to the praise that has already been stated!! Thanks a million for sharing your experience. I have a lathe, but I wasn't laughing, quite the contrary, I was crying because I have to hide behind my wallet... As confuscius said - it is not the tool that makes the master craftsman...
Cheers!!
Cheers!!
Sticky
Vermont, United States
Member Since: September 14, 2004
entire network: 2,220 Posts
KitMaker Network: 336 Posts
Member Since: September 14, 2004
entire network: 2,220 Posts
KitMaker Network: 336 Posts
Posted: Tuesday, February 14, 2006 - 10:46 PM UTC
All I can say is WOW that is pretty kewl!
MrRoo
Queensland, Australia
Member Since: October 07, 2002
entire network: 3,856 Posts
KitMaker Network: 719 Posts
Member Since: October 07, 2002
entire network: 3,856 Posts
KitMaker Network: 719 Posts
Posted: Wednesday, February 15, 2006 - 01:07 AM UTC
LOL :-) I had to leave replying to this thread so that I could see some of the other replies to what , in my opinion as well, is the work of a master.
I told you Roger when you first showed me the photos of your stuff, and said this is what I do, that you were miles out of my league and I meant that you were and still are miles ahead of my efforts.
More power to your arm my friend
cheers
Cliff
I told you Roger when you first showed me the photos of your stuff, and said this is what I do, that you were miles out of my league and I meant that you were and still are miles ahead of my efforts.
More power to your arm my friend
cheers
Cliff
Posted: Wednesday, February 15, 2006 - 01:32 AM UTC
GULP!
Bud1
Wexford, Ireland
Member Since: January 06, 2005
entire network: 73 Posts
KitMaker Network: 0 Posts
Member Since: January 06, 2005
entire network: 73 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, February 15, 2006 - 02:26 AM UTC
Great "how to" Roger, thanks for sharing that. The pics are very clear and I'll definitely try that out on a project I have in mind for a while. Dunno if I have the skill and patience but I'm good at the part with the liquid so whatever the outcome, I win!
Posted: Wednesday, February 15, 2006 - 02:49 AM UTC
Quoted Text
Great "how to" Roger, thanks for sharing that. The pics are very clear and I'll definitely try that out on a project I have in mind for a while. Dunno if I have the skill and patience but I'm good at the part with the liquid so whatever the outcome, I win!
Ach! Bugger the wheels, I'll come and have a liquid with you. That at least I know how to do. :-)
HauntedPen
Pennsylvania, United States
Member Since: March 15, 2005
entire network: 34 Posts
KitMaker Network: 9 Posts
Member Since: March 15, 2005
entire network: 34 Posts
KitMaker Network: 9 Posts
Posted: Wednesday, February 15, 2006 - 04:45 AM UTC
Excellent work and tutorial Roger! This is one I'm printing up and saving for future reference. I have to agree with the others: you should see about making an article about this.
Thanks for sharing your technique.
Steve K.
Thanks for sharing your technique.
Steve K.
Removed by original poster on 11/08/06 - 18:53:26 (GMT).
gcdavidson
Ontario, Canada
Member Since: August 05, 2003
entire network: 1,698 Posts
KitMaker Network: 130 Posts
Member Since: August 05, 2003
entire network: 1,698 Posts
KitMaker Network: 130 Posts
Posted: Friday, August 04, 2006 - 04:45 AM UTC
nice idea of wrapping the tread!
I'll have to try your technique on the DM800
I'll have to try your technique on the DM800
Removed by original poster on 11/08/06 - 18:54:19 (GMT).
Posted: Tuesday, September 12, 2006 - 12:04 PM UTC
loverly jubberly !!---could read this for ever
aye
BARV
(GOSMG)