Hi all
I'm starting to modify some 1:72 German, British and Russian AFV for my own T2K idea and I just want to make sure that my scale conversion formula is working.
I'm looking to buy some plastic sheet and rods etc to make the conversions and let me see if I've got this right:
A plastic H beam that is 3/32nd of an inch wide = a 1:72 scale H beam that is 17cm wide?
and
A plastic H beam that is 1/8th of an inch wide = a 1:72 scale H beam that is 23cm wide? More or less the size of the roof beams in my office.
Cheers
Scratchbuilders!: Armor/AFV
This is a group for armor scratchbuilding questions, topics and projects.
This is a group for armor scratchbuilding questions, topics and projects.
Hosted by Mike Kirchoff
Please check my maths
Braystaff
England - North, United Kingdom
Member Since: August 24, 2005
entire network: 154 Posts
KitMaker Network: 69 Posts
Member Since: August 24, 2005
entire network: 154 Posts
KitMaker Network: 69 Posts
Posted: Sunday, November 13, 2005 - 02:15 AM UTC
Foxy
Nordrhein-Westfalen, Germany
Member Since: December 25, 2002
entire network: 332 Posts
KitMaker Network: 43 Posts
Member Since: December 25, 2002
entire network: 332 Posts
KitMaker Network: 43 Posts
Posted: Sunday, November 13, 2005 - 03:34 AM UTC
Hello,
Im not quite sure if i got your question right, so i will try to answer the way i understand.
I hope you stated in the way like
Real measurements = 1:72 measurements.
So let's go to calculating:
1 inch = 2,54 cm.
H beam 3/32nd inch = 0,24 cm
that equals in 1:72: 0,003 cm = 0,03 mm so extremly small.
H beam 1/8th inch = 0,32 cm
that equals in 1:72: 0,004 cm = 0,04 mm
Im not quite sure if i got your question right, so i will try to answer the way i understand.
I hope you stated in the way like
Real measurements = 1:72 measurements.
So let's go to calculating:
1 inch = 2,54 cm.
H beam 3/32nd inch = 0,24 cm
that equals in 1:72: 0,003 cm = 0,03 mm so extremly small.
H beam 1/8th inch = 0,32 cm
that equals in 1:72: 0,004 cm = 0,04 mm
DaveCox
England - South East, United Kingdom
Member Since: January 11, 2003
entire network: 4,307 Posts
KitMaker Network: 788 Posts
Member Since: January 11, 2003
entire network: 4,307 Posts
KitMaker Network: 788 Posts
Posted: Sunday, November 13, 2005 - 05:22 AM UTC
Hi Sim, My maths isn't great, but I reckon you've scaled it up right.
Ripster
Wien, Austria
Member Since: June 01, 2005
entire network: 970 Posts
KitMaker Network: 160 Posts
Member Since: June 01, 2005
entire network: 970 Posts
KitMaker Network: 160 Posts
Posted: Sunday, November 13, 2005 - 05:46 AM UTC
My calculations agree with yours Sim
1/8 inch = 0.125 inch
0.125 x 72 = 9 inches
1 inch = 2.54 cm
9 x 2.54 = 22.86 cm (near enough to 23 for Government work!)
1/8 inch = 0.125 inch
0.125 x 72 = 9 inches
1 inch = 2.54 cm
9 x 2.54 = 22.86 cm (near enough to 23 for Government work!)
Braystaff
England - North, United Kingdom
Member Since: August 24, 2005
entire network: 154 Posts
KitMaker Network: 69 Posts
Member Since: August 24, 2005
entire network: 154 Posts
KitMaker Network: 69 Posts
Posted: Sunday, November 13, 2005 - 06:22 AM UTC
Thanks guys - I thought I'd got it right,.
It's my first attempt at starch building and I’ll have to buy all the plastic and metal for the first time
It's my first attempt at starch building and I’ll have to buy all the plastic and metal for the first time
rebelsoldier
Arizona, United States
Member Since: June 30, 2004
entire network: 1,336 Posts
KitMaker Network: 570 Posts
Member Since: June 30, 2004
entire network: 1,336 Posts
KitMaker Network: 570 Posts
Posted: Sunday, November 20, 2005 - 07:56 PM UTC
now if ya could translate that to 1/35 i'd appreciate it, i want to scratch build a bustle rack for my m551.
thanks in advance
reb
thanks in advance
reb
matt
Campaigns Administrator
New York, United States
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Posted: Monday, November 21, 2005 - 03:34 AM UTC
sorry it's not in metric.....
rebelsoldier
Arizona, United States
Member Since: June 30, 2004
entire network: 1,336 Posts
KitMaker Network: 570 Posts
Member Since: June 30, 2004
entire network: 1,336 Posts
KitMaker Network: 570 Posts
Posted: Monday, November 21, 2005 - 07:08 AM UTC
thanks bunches !!!!!!!!!!!!!!!!!!!!!!
no metric is ok by me
reb in texas
no metric is ok by me
reb in texas
matt
Campaigns Administrator
New York, United States
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Member Since: February 28, 2002
entire network: 5,957 Posts
KitMaker Network: 2,626 Posts
Posted: Monday, November 21, 2005 - 07:34 AM UTC
I whipped that up one day (bored in CAD class) in Highschool.............................. been really hand since....
still use it even if i have 3 diff. 1/35 scale rules...LOL :-) :-) :-) :-) :-) :-) :-) :-)
still use it even if i have 3 diff. 1/35 scale rules...LOL :-) :-) :-) :-) :-) :-) :-) :-)
TacFireGuru
Colorado, United States
Member Since: December 25, 2004
entire network: 3,770 Posts
KitMaker Network: 747 Posts
Member Since: December 25, 2004
entire network: 3,770 Posts
KitMaker Network: 747 Posts
Posted: Monday, December 05, 2005 - 10:55 AM UTC
Hey all,
Evergreen has a pretty nice conversion chart located at http://www.evergreenscalemodels.com/conversions.htm#Scale%20Conversion%20Charts . Pretty comprehensive.
Mike
Evergreen has a pretty nice conversion chart located at http://www.evergreenscalemodels.com/conversions.htm#Scale%20Conversion%20Charts . Pretty comprehensive.
Mike
warthog
Metro Manila, Philippines
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Posted: Monday, December 05, 2005 - 11:16 AM UTC
Posted: Monday, December 05, 2005 - 11:42 AM UTC
Posted: Friday, December 09, 2005 - 05:55 AM UTC
PM me with your e-mail and I can send you a pretty useful model calculator.