Hosted by Jim Starkweather
Model Glass
afromon_11
New York, United States
Member Since: September 27, 2005
entire network: 52 Posts
KitMaker Network: 0 Posts
Member Since: September 27, 2005
entire network: 52 Posts
KitMaker Network: 0 Posts
Posted: Saturday, October 01, 2005 - 03:52 PM UTC
I recently bought a Tamiya 1/35th scale Kublewagen. I noticed that I would have to install some kind of glass windshield onto the front.
However I have had many bad experiences with these glass like objects,
does anyone know any effective ways of putting on the glass without creating glue markes, or has anyone devised a good way of holding the glass so you dont get smudge marks on it??
Thanks
Posted: Saturday, October 01, 2005 - 04:07 PM UTC
Use PVA glue (white glue, wood glue, elmers ) to glue the glass parts, and hold the glass only with clean fingers.
Cheers
Henk
Cheers
Henk
mother
New York, United States
Member Since: January 29, 2004
entire network: 3,836 Posts
KitMaker Network: 1,121 Posts
Member Since: January 29, 2004
entire network: 3,836 Posts
KitMaker Network: 1,121 Posts
Posted: Saturday, October 01, 2005 - 04:16 PM UTC
John,
Here's what I like to use, straight Testors gloss coat. I'll paint on the gloss coat to the area where the clear part is to be installed, then wait about a minute and place the clear part on. BTW welcome to Armorama
Here's what I like to use, straight Testors gloss coat. I'll paint on the gloss coat to the area where the clear part is to be installed, then wait about a minute and place the clear part on. BTW welcome to Armorama