Hello kawan2 sekalian
Is the product 'Future' available in Malaysia ? If you read those mags from US (FSM) or UK (MM), you'll always see that they would use the product 'Future' to seal the models or to remove minor blemishes from canopies. The product 'Future' itself is actually a acrylic floor polish. I suppose the acrylic would harden once on the model and thus it is suitable for the above application.
I have had gone to Ace Hardware at MegaMall but couldnt find the product 'Future',but I did see another product that says 'Acrylic floor sealant' . I wonder if it is the same thing ?
Anybody using 'Future' here? or is it something not really worth buying ? Currently i seal my models with Gunze Top Coat and polish/remove blemishes with Tamiya's wonderful sandpapers and polish.
sllim
Community Forum: Kaki Model Malaysia
Want to meet up with modelers in your country or region? This is the place.
Want to meet up with modelers in your country or region? This is the place.
Hosted by Jim Starkweather
Is Future available in Malaysia ?
seelianglim
Kuala Lumpur, Malaysia
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, August 09, 2005 - 01:22 PM UTC
Target_J
Kuala Lumpur, Malaysia
Member Since: December 08, 2004
entire network: 145 Posts
KitMaker Network: 0 Posts
Member Since: December 08, 2004
entire network: 145 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, August 09, 2005 - 01:46 PM UTC
Hi Lim,
You can get Future from ACE Hardware in the IKANO outlet.
You can get Future from ACE Hardware in the IKANO outlet.
seelianglim
Kuala Lumpur, Malaysia
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Member Since: August 04, 2005
entire network: 80 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, August 09, 2005 - 04:54 PM UTC
Hi
Thanks
sllim
Thanks
sllim
Argrillion
Kuala Lumpur, Malaysia
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Member Since: November 26, 2004
entire network: 447 Posts
KitMaker Network: 0 Posts
Posted: Tuesday, August 09, 2005 - 06:01 PM UTC
Lim, go easy with the coats. It can be nasty if applied too thick.
HauntedTank
Georgetown, Malaysia
Member Since: December 26, 2004
entire network: 175 Posts
KitMaker Network: 0 Posts
Member Since: December 26, 2004
entire network: 175 Posts
KitMaker Network: 0 Posts
Posted: Friday, August 12, 2005 - 05:52 AM UTC
Hi See Liang
I use Future. Target J is right. Get it there. Be careful not to let it harden inside your a/b. Even after a thorough flush it jammed my Badger 150 solid!!!
had to drill the handle casing to get a grip so's to unscrew it. The inside treads had to be pried loose with pliers and a vise ! My a/b now bear scars of a vet ! . Dismantle and soak a/b after use and Future will serve you well. I use it for everything the magazines says it can do....and more....
Regards
Patrick
I use Future. Target J is right. Get it there. Be careful not to let it harden inside your a/b. Even after a thorough flush it jammed my Badger 150 solid!!!
had to drill the handle casing to get a grip so's to unscrew it. The inside treads had to be pried loose with pliers and a vise ! My a/b now bear scars of a vet ! . Dismantle and soak a/b after use and Future will serve you well. I use it for everything the magazines says it can do....and more....
Regards
Patrick