Scratchbuilders!: Armor/AFV
This is a group for armor scratchbuilding questions, topics and projects.
This is a group for armor scratchbuilding questions, topics and projects.
Hosted by Mike Kirchoff
Gepanzerte Pioniermachine GPM-PT2
Posted: Tuesday, April 26, 2005 - 07:26 AM UTC
hI,
Here I go again...another "queer beastie".......
So far ..1. its aLEOPARD?
2. its a bucket digger(again)
3. it may be a prototype?
4 . its big and ugly....
5 . I want to build it !!
HELP......any -one got any info to give me....please.
The only pic I have is too small to copy ..........promise I'll do a photo build ...and.... if any-one wants to build with me will share ALL info
aye
BARV
Posted: Thursday, April 28, 2005 - 09:49 AM UTC
All,
Does this jog any thoughts............too good a "beastie" not to scratch
HELP .....asked
aye
BARV
Does this jog any thoughts............too good a "beastie" not to scratch
HELP .....asked
aye
BARV
jimbrae
Provincia de Lugo, Spain / Espaņa
Member Since: April 23, 2003
entire network: 12,927 Posts
KitMaker Network: 2,060 Posts
Member Since: April 23, 2003
entire network: 12,927 Posts
KitMaker Network: 2,060 Posts
Posted: Saturday, April 30, 2005 - 03:29 AM UTC
jimbrae
Provincia de Lugo, Spain / Espaņa
Member Since: April 23, 2003
entire network: 12,927 Posts
KitMaker Network: 2,060 Posts
Member Since: April 23, 2003
entire network: 12,927 Posts
KitMaker Network: 2,060 Posts
Posted: Saturday, April 30, 2005 - 03:33 AM UTC
Posted: Saturday, April 30, 2005 - 05:24 AM UTC
Jim and Kerry,
Jim ..pics are handy....now in my collection, Kerry ......think this is a toughie....may need some one who has 1st -hand knowledge of the monster
Thanks for the help.......going to build--- Alacran was not too hard ....this could be .
challenge -challenge ---- thats what this site is about? Scratch building is its name -- Scratching is (my) the game
Here I go again ---(Jim -want a pic build?)
aye
BARV
ps .......... Help.........will go nutty.
Jim ..pics are handy....now in my collection, Kerry ......think this is a toughie....may need some one who has 1st -hand knowledge of the monster
Thanks for the help.......going to build--- Alacran was not too hard ....this could be .
challenge -challenge ---- thats what this site is about? Scratch building is its name -- Scratching is (my) the game
Here I go again ---(Jim -want a pic build?)
aye
BARV
ps .......... Help.........will go nutty.
straightedge
Ohio, United States
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Posted: Saturday, April 30, 2005 - 08:55 AM UTC
On those sites this morning, I seen all them, but I only told you about that site that had the one that I thought looked like the one you want to build, I thought that is what we was looking for, not these close looking ones.
These might as well be a total different tank, cause they have none of the same top parts.
Kerry
These might as well be a total different tank, cause they have none of the same top parts.
Kerry
Posted: Saturday, April 30, 2005 - 09:22 AM UTC
Kerry,
Got an other link to show the "beastie....
http://home.t-online.de/home/wdpi4
Look for gpm2 01jpg.......02jpg
Came from other post on an other site
Aye,
BARV
Got an other link to show the "beastie....
http://home.t-online.de/home/wdpi4
Look for gpm2 01jpg.......02jpg
Came from other post on an other site
Aye,
BARV
Posted: Saturday, April 30, 2005 - 09:24 AM UTC
I knew someone made a toy of this and found it on e/bay.Its not quite the same but it might help you build it if you bought the toy as you will have the measurements.
P.S i'm not selling it by the way. Heres the link.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6958041510
P.S i'm not selling it by the way. Heres the link.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6958041510
Posted: Saturday, April 30, 2005 - 09:32 AM UTC
Andy,
cheers for that .....sorry but wrong one.......
see post above......thanks for trying
aye
BARV
cheers for that .....sorry but wrong one.......
see post above......thanks for trying
aye
BARV
straightedge
Ohio, United States
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Posted: Saturday, April 30, 2005 - 11:22 PM UTC
I looked at the picture I told Barv about again, and seen it was the wrong one, and I apologize for that Barv, and you guys putting up pictures of anything but the one he wants to build, is like somebody giving you directions to a different model, it doesn't help at all, I'm sorry to say, I know you meant well, but when somebody is trying to scratch build, they need the very same one they are building, with no difference.
Like I said, other wise that would be like somebody giving you the wrong directions to put a model together. Like yesterday when I went through all them pages, then I found that one photograph, that was so dark then, I could of sworn that was it, I should of held on to it until I made sure that was it, but like I said I was so excited, that I thought I finally found one, cause I had been searching all day, but now I find out, I never did find one yet.
After what I seen of Barv's mailing list, he has his hands full anyway, a lot more then I could handle, but I'm sure he appreciates all the help, but it only helps if it is the very same one he showed in the very first picture.
He never asked me to say this, I'm just trying to help.
Kerry
Like I said, other wise that would be like somebody giving you the wrong directions to put a model together. Like yesterday when I went through all them pages, then I found that one photograph, that was so dark then, I could of sworn that was it, I should of held on to it until I made sure that was it, but like I said I was so excited, that I thought I finally found one, cause I had been searching all day, but now I find out, I never did find one yet.
After what I seen of Barv's mailing list, he has his hands full anyway, a lot more then I could handle, but I'm sure he appreciates all the help, but it only helps if it is the very same one he showed in the very first picture.
He never asked me to say this, I'm just trying to help.
Kerry
AVRE165
England - South East, United Kingdom
Member Since: December 31, 2002
entire network: 181 Posts
KitMaker Network: 0 Posts
Member Since: December 31, 2002
entire network: 181 Posts
KitMaker Network: 0 Posts
Posted: Sunday, May 01, 2005 - 10:49 AM UTC
hi
should have emailed me first.
ok i have somewhere a line drawing of the beast along with some other stuff which came out in a defence international years ago.
also i picked up Jochen Vollert pionerpanzer 1956 to now
it is in there along with 8 pictures.
more info
Elite in Germany do the DACH's , might be possible to ask for just these parts.
i have looked it to doing it myself, so you can use there Booms,buckets etc but the turn table mounts are slightly differant.
hope this helps
ossie
should have emailed me first.
ok i have somewhere a line drawing of the beast along with some other stuff which came out in a defence international years ago.
also i picked up Jochen Vollert pionerpanzer 1956 to now
it is in there along with 8 pictures.
more info
Elite in Germany do the DACH's , might be possible to ask for just these parts.
i have looked it to doing it myself, so you can use there Booms,buckets etc but the turn table mounts are slightly differant.
hope this helps
ossie
Posted: Sunday, May 01, 2005 - 10:59 AM UTC
OSSIE,
Great to see you back..........(pm to follow)
Any -thing on this "beastie " is allways wecome....
aye
BARV
Great to see you back..........(pm to follow)
Any -thing on this "beastie " is allways wecome....
aye
BARV
straightedge
Ohio, United States
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Member Since: January 18, 2004
entire network: 1,352 Posts
KitMaker Network: 571 Posts
Posted: Tuesday, May 03, 2005 - 12:00 AM UTC
Barv, thanks for showing me that picture of gpm 201 that was really different.
Kerry
Kerry
Posted: Tuesday, May 03, 2005 - 10:29 AM UTC
All,
---yep thats me.......started to build ...glutton for punishment.
?Can I have its own site Jim ....(dont want to upset any-one)..will give comentary?
Again ..THANK YOU ALL...see you on the other si(d)te.
aye,
BARV
PS.....................Alacran pics are being reduced on my gallery to accomodate new GPM-PT2 pics.......grateful to all who supportedthe "allycan" build.
---yep thats me.......started to build ...glutton for punishment.
?Can I have its own site Jim ....(dont want to upset any-one)..will give comentary?
Again ..THANK YOU ALL...see you on the other si(d)te.
aye,
BARV
PS.....................Alacran pics are being reduced on my gallery to accomodate new GPM-PT2 pics.......grateful to all who supportedthe "allycan" build.