i screwed up my airbrush na lagay ko sa bleach then nakalimutan ko tanggalin ayun nadissolve un ibang parts considering metal un....
hay what was i thinking when i dipped it in bleach
Community Forum: Filipino Modelers PhorumWant to meet up with modelers in your country or region? This is the place.
Hosted by Jim Starkweather
Airbrush
flex_cs
Member Since: December 03, 2003
entire network: 151 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, June 30, 2004 - 02:51 AM UTC
guys me question lng ako san ba nakabibili and how much would it cost? airbrush lng wout un mga compressor and stuff lyk that
i screwed up my airbrush na lagay ko sa bleach then nakalimutan ko tanggalin ayun nadissolve un ibang parts considering metal un....
hay what was i thinking when i dipped it in bleach
i screwed up my airbrush na lagay ko sa bleach then nakalimutan ko tanggalin ayun nadissolve un ibang parts considering metal un....
hay what was i thinking when i dipped it in bleach
4-Eyes71
Member Since: December 02, 2003
entire network: 424 Posts
KitMaker Network: 376 Posts
Posted: Wednesday, June 30, 2004 - 04:43 AM UTC
Quoted Text
guys me question lng ako san ba nakabibili and how much would it cost? airbrush lng wout un mga compressor and stuff lyk that
i screwed up my airbrush na lagay ko sa bleach then nakalimutan ko tanggalin ayun nadissolve un ibang parts considering metal un....
hay what was i thinking when i dipped it in bleach
Well, Flex. You know what they say, experience can be a very cruel teacher. They give you the test before the lesson.
OK, seriously now. What a/b are you using? If it's a Tamiya (which I Lil's is the place to go. Tamiya's basic a/b costs about 4,800+ pesos. I'm talking Spray Works here which comes with its own compressor.
If it's Badger, well, that'll depend on where you live. If you live in Manila (or within striking distance of it), there are several art stores in the U-Belt area where you can go.
If you are within striking distance of shangri-la mall in Mandaluyong, there's Han's Tools on the 6th level. A good unit (no compressor) will fetch at above 5 grand.
sigman
Member Since: June 27, 2004
entire network: 6 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, June 30, 2004 - 10:52 PM UTC
Hey guys, do you know who is the dealer of Iwata airbrush and its parts? Thanks for any input.
flex_cs
Member Since: December 03, 2003
entire network: 151 Posts
KitMaker Network: 0 Posts
Posted: Wednesday, June 30, 2004 - 11:09 PM UTC
Nooooooh !!! it costs thousands wout the compressor?!?! saan sa ubelt coz im living near the place probably a 10 minute jeepney ride lng 
ah im using a badger 350 from my dad so u might say its really old but works fine until i screwed up....
u guys have any idea how much a badger airbrush cost these days??
ah im using a badger 350 from my dad so u might say its really old but works fine until i screwed up....
u guys have any idea how much a badger airbrush cost these days??
shonen_red
Member Since: February 20, 2003
entire network: 5,762 Posts
KitMaker Network: 2,610 Posts
Posted: Wednesday, June 30, 2004 - 11:14 PM UTC
Quoted Text
Nooooooh !!! it costs thousands wout the compressor?!?! saan sa ubelt coz im living near the place probably a 10 minute jeepney ride lng
ah im using a badger 350 from my dad so u might say its really old but works fine until i screwed up....
u guys have any idea how much a badger airbrush cost these days??
Depends sa Badger mo. Mine is the 175 Crescendo which costs 6.5k :-) Yung Badger 150 naman is 6k.
Tapos yung compressor ko is Kawasaki 25-30 psi - 4k.
:-)
LaTtEX
Member Since: May 13, 2003
entire network: 292 Posts
KitMaker Network: 0 Posts
Posted: Thursday, July 01, 2004 - 12:16 AM UTC
Tamiya's Basic Sprayworks stainless steel replacement AB (NOT the High Grade version but good enough) costs around 800 pesos. That's about as good a deal as it gets.
shonen_red
Member Since: February 20, 2003
entire network: 5,762 Posts
KitMaker Network: 2,610 Posts
Posted: Thursday, July 01, 2004 - 01:06 AM UTC
Quoted Text
Tamiya's Basic Sprayworks stainless steel replacement AB (NOT the High Grade version but good enough) costs around 800 pesos. That's about as good a deal as it gets.
Meron ka noon? Where to buy?
buck
Member Since: November 12, 2003
entire network: 437 Posts
KitMaker Network: 0 Posts
Posted: Thursday, July 01, 2004 - 01:59 AM UTC
Flex,
There was a shop in Recto (going to Divisoria) that sold Badger spare parts. Problem is, I dont know if it still does business though.
The basic Tamiya AB Lattex mentioned is a very good substitute. Gravity fed and sprays well.
Sigman,
Hey, welcome to this corner of the net! This is a place a lot of us call home.
There was a shop in Recto (going to Divisoria) that sold Badger spare parts. Problem is, I dont know if it still does business though.
The basic Tamiya AB Lattex mentioned is a very good substitute. Gravity fed and sprays well.
Sigman,
Hey, welcome to this corner of the net! This is a place a lot of us call home.
Bull
Member Since: November 18, 2003
entire network: 114 Posts
KitMaker Network: 0 Posts
Posted: Thursday, July 01, 2004 - 02:14 AM UTC
Quoted Text
Tamiya's Basic Sprayworks stainless steel replacement AB (NOT the High Grade version but good enough) costs around 800 pesos. That's about as good a deal as it gets.
I'm curious too Jon. I haven't actually seen one on sale separate from the Spray Works Set. I've been repairing a lot of the handpieces and they definitely cost more than 800 to overhaul. So that would indeed be a great deal.
warthog
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Posted: Thursday, July 01, 2004 - 12:09 PM UTC
Badger spare parts can be bought at St.Patricks Commercial. They have branches in Sampaloc, Recto and Makati. I once bought from them a water filter for my compressor. I think the owners are the same as the art supply shop in Recto....hmmmm, forgot the name. I bought my Badger 175 AB set from them...
warthog
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Posted: Thursday, July 01, 2004 - 12:16 PM UTC
I got the list of Badger AB Philippine distributors
1) M. Enriquez Art Supplies, Inc.
tel. No. 7115160
2) Uysons Industries, Inc.
tel.No. 2422243/2265
Located in Binondo
3) St. Patrick's Commercial
Tel. No. 9110044
Cubao
In St. Patrick's all you have to do is bring the part model number and maybe they have stock...
1) M. Enriquez Art Supplies, Inc.
tel. No. 7115160
2) Uysons Industries, Inc.
tel.No. 2422243/2265
Located in Binondo
3) St. Patrick's Commercial
Tel. No. 9110044
Cubao
In St. Patrick's all you have to do is bring the part model number and maybe they have stock...
rysorne
Member Since: April 28, 2002
entire network: 115 Posts
KitMaker Network: 0 Posts
Posted: Thursday, July 01, 2004 - 12:18 PM UTC
Quoted Text
How much is the water filter at may regulator din ba sila?Badger spare parts can be bought at St.Patricks Commercial. They have branches in Sampaloc, Recto and Makati. I once bought from them a water filter for my compressor. I think the owners are the same as the art supply shop in Recto....hmmmm, forgot the name. I bought my Badger 175 AB set from them...
cbrain21
Member Since: February 16, 2004
entire network: 151 Posts
KitMaker Network: 141 Posts
Posted: Thursday, July 01, 2004 - 01:29 PM UTC
Question din.... where is the St. Patricks branch in Makati? 
cardinal
Member Since: October 05, 2003
entire network: 1,008 Posts
KitMaker Network: 492 Posts
Posted: Friday, July 02, 2004 - 12:58 AM UTC
Quoted Text
I once bought from them a water filter for my compressor.
Correct me if I'm wrong here but do you mean a water/moisture separator?
sigman
Member Since: June 27, 2004
entire network: 6 Posts
KitMaker Network: 0 Posts
Posted: Friday, July 02, 2004 - 01:21 AM UTC
Does anyone know who the dealer of Iwata?
shonen_red
Member Since: February 20, 2003
entire network: 5,762 Posts
KitMaker Network: 2,610 Posts
Posted: Friday, July 02, 2004 - 01:28 AM UTC
Quoted Text
Does anyone know who the dealer of Iwata?
Hi sigman! I think there is no available dealer here in the Phil. Let's wait for the others to come by...
4-Eyes71
Member Since: December 02, 2003
entire network: 424 Posts
KitMaker Network: 376 Posts
Posted: Friday, July 02, 2004 - 02:38 AM UTC
Quoted Text
Nooooooh !!! it costs thousands wout the compressor?!?! saan sa ubelt coz im living near the place probably a 10 minute jeepney ride lng
ah im using a badger 350 from my dad so u might say its really old but works fine until i screwed up....
u guys have any idea how much a badger airbrush cost these days??
There are 3 shops.
1. R Enriquez along Recto near Roben theater.
2. Devoir Commercial cor. of Recto and Quezon Blvd. facing Isetann
3. St. Patrick's corner of Recto and S.H. Loyola (after UE if you're coming from Sta. Cruz)
flex_cs
Member Since: December 03, 2003
entire network: 151 Posts
KitMaker Network: 0 Posts
Posted: Friday, July 02, 2004 - 08:50 PM UTC
Quoted Text
got the list of Badger AB Philippine distributors
1) M. Enriquez Art Supplies, Inc.
tel. No. 7115160
2) Uysons Industries, Inc.
tel.No. 2422243/2265
Located in Binondo
3) St. Patrick's Commercial
Tel. No. 9110044
Cubao
In St. Patrick's all you have to do is bring the part model number and maybe they have stock...
haha! in Binondo mas malapit pa ako dun!! thanks warthog!!
4-Eyes71
Member Since: December 02, 2003
entire network: 424 Posts
KitMaker Network: 376 Posts
Posted: Friday, July 02, 2004 - 11:23 PM UTC
Quoted Text
Tamiya's Basic Sprayworks stainless steel replacement AB (NOT the High Grade version but good enough) costs around 800 pesos. That's about as good a deal as it gets.
Very interesting, LatteX. Where did you see one (or bought one)? I was thinking of getting an HG but if this is available, I may reconsider.
warthog
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Posted: Sunday, July 04, 2004 - 12:54 PM UTC
Quoted Text
Question din.... where is the St. Patricks branch in Makati?
St. Patrick's in Makati is in Pasay road near the South Super highway....hmmmm it's at the right side of Kamayan (Barrio fiesta..looks the same) along pasay road (Arnaiz).
Quoted Text
How much is the water filter at may regulator din ba sila?
If you are refering to water trap w/regultator...(I bought one from them)....I think it costs between PhP 2K to 2.5K.
cbrain21
Member Since: February 16, 2004
entire network: 151 Posts
KitMaker Network: 141 Posts
Posted: Sunday, July 04, 2004 - 02:33 PM UTC
Quoted Text
St. Patrick's in Makati is in Pasay road near the South Super highway....hmmmm it's at the right side of Kamayan (Barrio fiesta..looks the same) along pasay road (Arnaiz).
Thanks, I'd visit the place whenever mapadpad uli ako ng Makati.
Quoted Text
If you are refering to water trap w/regultator...(I bought one from them)....I think it costs between PhP 2K to 2.5K.
Does the water trap w/ regulator work even with a compressor setup na walang tank? I might get one too....
shonen_red
Member Since: February 20, 2003
entire network: 5,762 Posts
KitMaker Network: 2,610 Posts
Posted: Sunday, July 04, 2004 - 04:49 PM UTC
Dude, kung sakaling makakarating ka doon sa shops, pakit tanong naman kung meron silang bottle + siphon tube and cap na available (for Badger 175). Di ko magamit AB ko dahil walang siphon tube + cap.
warthog
Member Since: July 29, 2002
entire network: 1,460 Posts
KitMaker Network: 366 Posts
Posted: Sunday, July 04, 2004 - 06:41 PM UTC
Quoted Text
Does the water trap w/ regulator work even with a compressor setup na walang tank?
Yup, the copressor I'm using does not have a tank. My compressor is a Badger Whirlwind II model 80-2, the maximum pressure is just 28PSI. The one I got is a Badger Air regulator, filter and gauge set. What I'm not sure is if the water trap would fit other compressors.
 |
WEB HOSTING BY
Copyright ©2021 KitMaker Network and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.