Greetings,
I wanted to see how others have solved the issue of venting the exhaust of the spray booth from the basement workshop any info to help me solve this with a semi permident system. Photos of your setup would be great to see as well.
Thanks
Dave
Modeling in General
General discussions about modeling topics.
General discussions about modeling topics.
Hosted by Jim Starkweather
Spray booth exhaust from basement
railbuilderdhd
United States
Member Since: February 23, 2009
entire network: 113 Posts
KitMaker Network: 17 Posts
Member Since: February 23, 2009
entire network: 113 Posts
KitMaker Network: 17 Posts
Posted: Saturday, February 28, 2015 - 10:20 PM UTC
doppelganger
Idaho, United States
Member Since: March 09, 2010
entire network: 557 Posts
KitMaker Network: 29 Posts
Member Since: March 09, 2010
entire network: 557 Posts
KitMaker Network: 29 Posts
Posted: Wednesday, March 04, 2015 - 12:47 PM UTC
Maybe something like this? as you can see my ducting to outside is a short run. Had to use to HVAC duct blowers to make it work. So, depending on how far you have to run the exhaust ducting is the issue.You need a lot of CFMs on the exhaust fan to make a long run...very expensive most likely. I spent about $200.00 for this set up, it is a knock off of a Paasche paint booth. I use clear plastic wrap secured across the front, cheap and replaceable when it becomes fouled with paint dust.
doppelganger
Idaho, United States
Member Since: March 09, 2010
entire network: 557 Posts
KitMaker Network: 29 Posts
Member Since: March 09, 2010
entire network: 557 Posts
KitMaker Network: 29 Posts
Posted: Wednesday, March 04, 2015 - 12:49 PM UTC
Bought everything at home depot. https://aeroscale.kitmaker.net/forums/227863#1920401