Hi all,
My interest is in radio controlled model boats.
I have a 1/6 scale Dragon brand figure to use as an oarsman in a rowing boat, and to make him work successful, I have to loosen up the joints in his arms and shoulders.
Is there a way to get inside the body, apart from attacking it with a sharp knife or a Dremel grinder?
Hope someone can help.
Thanks
Micky
Hosted by Mike Kirchoff
Dragon 1/6 torso
mickyK
New South Wales, Australia
Member Since: February 16, 2014
entire network: 2 Posts
KitMaker Network: 2 Posts
Member Since: February 16, 2014
entire network: 2 Posts
KitMaker Network: 2 Posts
Posted: Saturday, February 15, 2014 - 01:36 PM UTC
Posted: Tuesday, February 18, 2014 - 06:26 AM UTC
Hi Mickey,
Maybe you can find the answer here:
http://www.jinsaotomesdangeroustoys.com/guides.html
It is a site dedicated to modifying action figures of
all types.
Hope this helps.
Cheers,
Joe
Maybe you can find the answer here:
http://www.jinsaotomesdangeroustoys.com/guides.html
It is a site dedicated to modifying action figures of
all types.
Hope this helps.
Cheers,
Joe
mickyK
New South Wales, Australia
Member Since: February 16, 2014
entire network: 2 Posts
KitMaker Network: 2 Posts
Member Since: February 16, 2014
entire network: 2 Posts
KitMaker Network: 2 Posts
Posted: Sunday, February 23, 2014 - 12:46 PM UTC
Thanks Joe,
Just the info I needed.
Mine is a little bit different, but the site pointed me in the right direction.
Mickey
Just the info I needed.
Mine is a little bit different, but the site pointed me in the right direction.
Mickey