_GOTOBOTTOM
 Community Forum: Kiwi Korner
Want to meet up with modelers in your country or region? This is the place.
Hosted by Jim Starkweather
Asu 85 1970 from trumpeter
Spilcher
Visit this Community
Wellington, New Zealand
Member Since: May 07, 2013
entire network: 2 Posts
KitMaker Network: 1 Posts
Posted: Monday, May 06, 2013 - 02:21 PM UTC
Dear all I am currently building the above and do you think I can get the idler wheel brackets fitted? If anyone out there has had a crack at this I would appreciate any suggestions on how to fit as I have tried everything.
Thanks in advance
Pilch
ColonelKFChicken
Visit this Community
Christchurch, New Zealand
Member Since: December 02, 2010
entire network: 30 Posts
KitMaker Network: 5 Posts
Posted: Wednesday, August 21, 2013 - 05:36 PM UTC
Hi Pilch.
Have you looked at the instructions for the SA from trumpeter? I think the chassis if not the same is similar ie has same number of road wheels, idlers and sprockets seem to be in the same place.
I built the SA 6 a while back and was unhappy with it so have since stripped it down to rebuild it
heres the instruction link for both;
http://www.1999.co.jp/eng/image/10061715z/70/1

http://www.1999.co.jp/eng/image/10162961z4/70/4
The brackets for the sa6 are already fitted, the ones for the asu have to be stuck on. The sa6 is the first link, the asu 85 is the second.Comparing the two might help.
I hope this helps
heres the asu 85 link for the whole lot;
http://www.1999.co.jp/eng/10162961
 _GOTOTOP