_GOTOBOTTOM
Modeling in General: Advice on...
Need some general advice? Place it here.
help needed assembling Dragon M1A1 AIM kit
rexbo4095
Visit this Community
Limburg, Netherlands
Member Since: July 21, 2007
entire network: 26 Posts
KitMaker Network: 7 Posts
Posted: Saturday, July 10, 2010 - 03:35 AM UTC
Hello,

Can anyone help me with the attachment of parts N39 to N15 and N40 to N14? It is the part that attaches the rear rack to the side rails of the turret. The instructions are sketchy and the various photo features I've looked at didn't show the parts clearly. Also, how do I secure Assembly F from step 11 in the instructions to the turret? There are holes provided in the turret but no matching bits on the assembly back plate.
I know this is really specific but I hope someone who has assembled this kit can help me. Thanks!

RexBo
Keeperofsouls2099
Visit this Community
Florida, United States
Member Since: January 14, 2009
entire network: 2,798 Posts
KitMaker Network: 286 Posts
Posted: Saturday, July 10, 2010 - 06:02 AM UTC
when I built mine there were holes in the back of the turrent and on the sides that the rack slides into
rexbo4095
Visit this Community
Limburg, Netherlands
Member Since: July 21, 2007
entire network: 26 Posts
KitMaker Network: 7 Posts
Posted: Saturday, July 10, 2010 - 06:31 AM UTC


Quoted Text

when I built mine there were holes in the back of the turrent and on the sides that the rack slides into



Do you happen to know if you used the retooled version of the kit because these holes are not present on my kit (I think). The only holes are for the side cases but they don't match up to anything.

RexBo
 _GOTOTOP