Well, after an order for a mirror backed custom display case came to my attention, I said "sure I can" and went about finding and acquiring some mirror acrylic I could incorporate into building a case with the back panel being mirrored for full view of the model. Well, it turned out perfect, and the customer was thrilled with the result. So, for anyone who wants to display their model on both sides without having to handle the case with model inside for full viewing, here's your answer. I build these cases in the constructed edge design, as that's the only way to incorporate the mirror back, and the cost is just a very little more than all clear sides and top, but for a lot of you, it's well worth the few extra dollars. Check out my website at http://www.grandpascabinets.com and click on the tab for custom display cases and then to "Mirror Cases" and you'll get some great pictures of the case, and an example of my build of the Missouri, which isn't even close to what I see from the pro's out there. Thanks all and check this new option out. Ron