i have both mr. mark softer and mr. mark setter. what is the order and process of using them? also, when does the future and lacquer come in?
thanks in advance!
Tools & Supplies
Discussions on the latest and greatest tools, glues, and gadgets.
Discussions on the latest and greatest tools, glues, and gadgets.
Hosted by Matt Leese
decals and mrr. softer and setter - how to?
Posted: Sunday, August 23, 2009 - 04:14 AM UTC
thegirl
Alberta, Canada
Member Since: January 19, 2008
entire network: 6,743 Posts
KitMaker Network: 456 Posts
Member Since: January 19, 2008
entire network: 6,743 Posts
KitMaker Network: 456 Posts
Posted: Sunday, August 23, 2009 - 06:20 AM UTC
Hi Matan .
Mr. Mark settler and soft is the same as super sol or decal set .
Frist apply the furure to the model either brush or spray right out of bottle . let this dry 24 hours . Apply Mr.Mark settle to the area which calls for it . Slide decal on , work out excess water and air bubbles . If the decal is having a hard time confroming to the surface apply Mr. Mark softer . this will soften the decal conforuming to the surface . Don't touch until decal is full dried . Apply again as need . When all decals are on and dried seal with dullcoat lacquer .
Mr. Mark settler and soft is the same as super sol or decal set .
Frist apply the furure to the model either brush or spray right out of bottle . let this dry 24 hours . Apply Mr.Mark settle to the area which calls for it . Slide decal on , work out excess water and air bubbles . If the decal is having a hard time confroming to the surface apply Mr. Mark softer . this will soften the decal conforuming to the surface . Don't touch until decal is full dried . Apply again as need . When all decals are on and dried seal with dullcoat lacquer .
Posted: Monday, August 24, 2009 - 12:46 AM UTC
thanks a lot!
mj
Illinois, United States
Member Since: March 16, 2002
entire network: 1,331 Posts
KitMaker Network: 334 Posts
Member Since: March 16, 2002
entire network: 1,331 Posts
KitMaker Network: 334 Posts
Posted: Monday, August 24, 2009 - 05:02 AM UTC
A word of warning about Mr. Soft...be careful how much you put on the decal. I've had Mr Soft completely melt a decal to rubbish. So I would start off with very small amounts, to see how it reacts with your brand of decals.
Cheers,
Mike
Cheers,
Mike