Gerardo ........... where in Ontario are you ?
Guy's I've notice a lot of people have a LOT of pieces being built at the same time. How do you guys do that ?!?!? I usually focus on one piece at a time........ if I was doing more then one or two at once, I'd need a BIGGER work space. I leave all my stuff out and I spread out pretty large when building a project.
Hosted by Jim Starkweather
What are you working on now?
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Monday, May 31, 2010 - 03:03 AM UTC
majorchuck
Member Since: June 30, 2007
entire network: 75 Posts
KitMaker Network: 9 Posts
Posted: Sunday, July 04, 2010 - 02:48 AM UTC
hobby boss 1/35 sd.kfz 222, italeri puma, end war halftrack panzerwreck and a end war pz4h wreck
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Friday, August 20, 2010 - 08:18 AM UTC
1/16th Kubelwagon is now painted and the weathering has begun. A LOT of plastic surface to detail in 1/16th !! Paint wear and tear as well as a few washes are now done.
bouttime
Member Since: October 19, 2010
entire network: 2 Posts
KitMaker Network: 1 Posts
Posted: Thursday, October 28, 2010 - 01:50 AM UTC
Hello all. This is my first post here.
I think the next box to open will be Academy's M3A1. I'm going to leave the turret off and build it as a recce vehicle in Italy.
Anyone else near Windsor?
Jeff
I think the next box to open will be Academy's M3A1. I'm going to leave the turret off and build it as a recce vehicle in Italy.
Anyone else near Windsor?
Jeff
sauceman
Member Since: September 28, 2006
entire network: 2,672 Posts
KitMaker Network: 179 Posts
Posted: Wednesday, November 10, 2010 - 02:21 AM UTC
Trumpy LAV III, waiting to get the Real Models update set.
Real Models Coyote conversion, man it has alot of photo etch LOL.
HB Leopard 2A6m CDN. I'm thinking of making my own Barracuda cam from the Echelons netting and foil.
I hope to get back to the workbench soon, that is after the hardwood floors get installed, the new bathroom gets built, the living room gets painted...
cheers
Real Models Coyote conversion, man it has alot of photo etch LOL.
HB Leopard 2A6m CDN. I'm thinking of making my own Barracuda cam from the Echelons netting and foil.
I hope to get back to the workbench soon, that is after the hardwood floors get installed, the new bathroom gets built, the living room gets painted...
cheers
majorchuck
Member Since: June 30, 2007
entire network: 75 Posts
KitMaker Network: 9 Posts
Posted: Monday, November 15, 2010 - 01:27 PM UTC
bench is full- canadian leo2a6m 07/08 in the stan, m1a1 aim 2004 usmc in the rack,m26a1 inchon usmc 1950 usmc infantry 1950 all 1/35 and a vintage kit airfix 1/32 marines done to korean war setting. a years worth all planed and started
hvader
Member Since: December 07, 2010
entire network: 3 Posts
KitMaker Network: 1 Posts
Posted: Thursday, December 09, 2010 - 07:44 AM UTC
1/35 italaria LCM 3. with Dragon commenwealth troops, a tamyia univrsal carrier, and i am using y dads 6-pound antitank gun to finish it all off. my juno beach diorama. will send pics 
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Thursday, December 09, 2010 - 06:03 PM UTC
In Toronto area and have since joined IPMS Toronto. You?
DT61
Member Since: September 18, 2005
entire network: 1,226 Posts
KitMaker Network: 399 Posts
Posted: Sunday, December 12, 2010 - 11:48 AM UTC
Presently working on the Hobby Boss VK1602. Nice kit, fit is great and the detail is crisp. Its my first "paper panzer" 
Darryl
Darryl
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Sunday, January 09, 2011 - 08:53 AM UTC
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Sunday, January 09, 2011 - 09:50 AM UTC
Nice job!! I;m envious.. lol 
So where in Toronto are you again? I'm in markham and with IPMS Toronto.
Get in touch
So where in Toronto are you again? I'm in markham and with IPMS Toronto.
Get in touch
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Monday, January 24, 2011 - 02:05 PM UTC
Hey Jerry.
About 20+ years ago I use to be a member with IPMS Toronto. I should really renew again or at least try to make it out to a meeting or two. It's been a long time. I'm in Woodbridge not too far from Canada's Wonderland. I don't know anyone out my way into this stuff. And my wife always looks at me strange when I sit down to work. But I find it relaxing and distracting ....... just what the doctor ordered !!!
About 20+ years ago I use to be a member with IPMS Toronto. I should really renew again or at least try to make it out to a meeting or two. It's been a long time. I'm in Woodbridge not too far from Canada's Wonderland. I don't know anyone out my way into this stuff. And my wife always looks at me strange when I sit down to work. But I find it relaxing and distracting ....... just what the doctor ordered !!!
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Monday, January 31, 2011 - 11:01 AM UTC
Quoted Text
Hey Jerry.
About 20+ years ago I use to be a member with IPMS Toronto. I should really renew again or at least try to make it out to a meeting or two. It's been a long time. I'm in Woodbridge not too far from Canada's Wonderland. I don't know anyone out my way into this stuff. And my wife always looks at me strange when I sit down to work. But I find it relaxing and distracting ....... just what the doctor ordered !!!
Ditto... but I just got back from a week on a cruise and realized how much I missed my time out in model land... lol.
get in touch, we should compare notes although you are somewhat ahead of me...
take care and see you
tsreid
Member Since: March 04, 2007
entire network: 77 Posts
KitMaker Network: 2 Posts
Posted: Monday, January 31, 2011 - 11:24 AM UTC
I've got a LAV III TUA- what-if on the go right now and finishing off a Leopard 2A6 with echelon barracuda cam (Afghanistan circa summer 2008)
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Wednesday, April 06, 2011 - 01:44 PM UTC
Steyr 1500 conversion getting close to being done.
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Wednesday, April 06, 2011 - 02:56 PM UTC
The TASCA #35-020 Sherman M4A3E8 Easy Eight is awesome with the CDN markings 
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Wednesday, April 06, 2011 - 03:02 PM UTC
ou demeure tu en ontario rick? I am in markham
Marmillian
Member Since: May 20, 2010
entire network: 11 Posts
KitMaker Network: 7 Posts
Posted: Wednesday, April 06, 2011 - 03:03 PM UTC
get in touch... IPMS is booming and getting better all the time. I'm in markham
SgtRam
Contributing Writer
#197
Member Since: March 06, 2011
entire network: 3,971 Posts
KitMaker Network: 568 Posts
Posted: Thursday, April 07, 2011 - 12:10 AM UTC
I am currently working on a CyberHobby 1/48 Bf110-D, as well as getting ready to put the finishing touches on my Bronco 1/35 Humber. I have a few sitting on deck, just can't decide what to start next.
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Thursday, February 02, 2012 - 01:14 AM UTC
Ive been really lazy lately and my workbench is a mess. Next week I have some time off and I think I will clean up the bench and finish up a few things. I haven't picked up a thing since I last posted. Brutal 
10digitdeeo
Member Since: April 15, 2010
entire network: 109 Posts
KitMaker Network: 25 Posts
Posted: Friday, February 03, 2012 - 02:45 AM UTC
I've got a Trumpeter LAV-III on the go, with the RM update, and the LORIT set. TOO MUCH ETCH!
Also working on the Academy M1151 with the Legend Rhino, AM wheels, and a whole mess of figures.
Also working on the Academy M1151 with the Legend Rhino, AM wheels, and a whole mess of figures.
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Monday, February 06, 2012 - 11:39 AM UTC
Booo-yaaah. Bought some new stuff. Worked on the diorama base for the German truck. Feels nice to be working on things again. But boy do the skillz get rusty if you're not doing this stuff all the time.
sauceman
Member Since: September 28, 2006
entire network: 2,672 Posts
KitMaker Network: 179 Posts
Posted: Tuesday, February 07, 2012 - 01:03 AM UTC
Just finished my Lynx.
And my M1114.
And well on my way with a Leopard 2A6m CDN.
cheers
And my M1114.
And well on my way with a Leopard 2A6m CDN.
cheers
stevescanlon
Member Since: July 05, 2011
entire network: 102 Posts
KitMaker Network: 58 Posts
Posted: Sunday, February 12, 2012 - 02:12 PM UTC
Currently working my way through a LAV 3 with a ton of etch from ET models, have to say the etch is quite easy to work though very intricate at times, i also have an M114 started as well.
Steve.
Steve.
tominizer
Member Since: September 26, 2006
entire network: 210 Posts
KitMaker Network: 118 Posts
Posted: Thursday, March 15, 2012 - 02:01 AM UTC
Now working on an Italeri Elephant with a bunch of update sets. There's going to be a lot of gutting and cutting on this one. Not even close to the base Dragon kit. This Italeri kit needs a lot of TLC. Pictures to follow.
 |
WEB HOSTING BY
Copyright ©2021 KitMaker Network and Kitmaker Network, a subsidiary of Silver Star Enterprises
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.
All Rights Reserved. Please read our Conditions of Use and Privacy Policy.